Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

1061118553 Kenmore Beverage Parts List

1-15 of 18

Icemaker control assembly (module, assembly)

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.

Easy Part #:

EAP2341896

Availability:

On Order

Price:

$85.77

Single outlet water valve kit (valve, solenoid)

When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making/dispensing ice, not dispensing water, or leaking, you may need to replace the water inlet valve. The water inlet valve is in the back section of your refrigerator and will need to be pulled out from the wall. Make sure to disconnect both the water and power supply before starting your repair. The manufacturer has redesigned the valve; it may appear different than the original. The updated valve has a new quick connection. To install the updated valve, cut the retaining nut off the existing water line and gently push into the new valve. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:

EAP358631

Availability:

In Stock

Price:

$36.42

Water fill cup and bearing (bearing & inlet)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker is not making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:

EAP11743318

Availability:

In Stock

Price:

$33.67

Ice mold (mold & heater assembly)

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:

EAP11749915

Availability:

On Order

Price:

$121.36

Cycling thermostat (thermostat)

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:

EAP11743313

Availability:

In Stock

Price:

$55.26

Ice stripper

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold. Once removed from the mold, the ice pieces are then deposited into the ice bucket ready to be dispensed. If your ice maker is not making any ice you may need to replace this part. The part is white in color and is approximately 9-inch long. The ice stripper is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:

EAP11739041

Availability:

In Stock

Price:

$32.01

Easy Part #:

EAP11752097

Availability:

In Stock

Price:

$5.73

Screw

Sold individually.

Easy Part #:

EAP11743743

Availability:

In Stock

Price:

$4.54

Shut off arm (shutoff arm)

The shut off arm works in conjunction with the ice maker in your refrigerator. When the shut off arm is high enough the ice maker will shut off and no more ice will be produced until the level of ice in the bin drops. The ice maker can be turned off by lifting the arm all the way to the top until in a locked position. This part is made of metal, and measures approximately 9 inches wide and 4 inches in height.

Easy Part #:

EAP11743310

Availability:

In Stock

Price:

$38.50

Ejector arm (ejector)

This arm is used to eject the ice from the icemaker into the bin.

Easy Part #:

EAP11743312

Availability:

In Stock

Price:

$34.62

Ice maker wire harness (wiring, harness)

This wire harness has a flat connector.

Easy Part #:

EAP11739095

Availability:

In Stock

Price:

$45.42

Screw

This screw is sold individually.

Easy Part #:

EAP11748102

Availability:

In Stock

Price:

$6.93

Easy Part #:

EAP11739202

Availability:

In Stock

Price:

$45.43

Easy Part #:

EAP11740356

Availability:

In Stock

Price:

$7.33

Easy Part #:

EAP377957

Availability:

Special Order

Price:

$8.64

1-15 of 18