10644109300 Parts List

1-15 of 244

Ice maker assembly - 8 cube (icemaker assembly (complete))

This icemaker can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located on the freezer door. Reuse bottom bracket from the original icemaker and attach to the new.

Easy Part #:

EAP869316

Availability:

In Stock - Ships Today

Price:

$108.74

Lower door closing cam (door closer, upper cam)

The door cam helps keep the door closed in the correct position. The cam is mounted around the door pivot point and is made up of a series of ridges and valleys to help keep the door in position. When you open the door, the cam will raise the door ever so slightly, then drop down into another valley to hold the door open. Then as you close the door again, just before the seal contacts the cabinet, the door will fall into another valley helping to hold the door closed. If your refrigerator uses a door closer, the door should shut all by itself. This part is black in color and made of plastic. This is a genuine OEM part.

Easy Part #:

EAP11739042

Availability:

In Stock - Ships Today

Price:

$5.51

Ice guide (guide, ice)

This ice guide is in the freezer door located in the dispenser section. This part helps the ice be guided from the dispenser to your cup once activated. If the ice maker will not dispense ice, or the locking tabs are broken on the guide, you may need to replace the ice guide. The ice guide is made of clear plastic and is a genuine OEM part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:

EAP11739026

Availability:

In Stock - Ships Today

Price:

$9.85

Icemaker control assembly (motor)

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.

Easy Part #:

EAP2341896

Availability:

In Stock - Ships Today

Price:

$61.26

Ice door kit (door mechanism assembly)

This ice door is used to seal off the ice chute when not in use. When in use the door will open in the dispenser chute to allow ice to be dispensed. This kit includes the ice door, support, spring, and delay. The heater ribbon is no longer attached. The heater is no longer needed due to an authorized update from the manufacturer. If your ice maker will not dispense ice or frost build up you may need to replace the part. Please remember to disconnect the power to the refrigerator before starting your repair.

Easy Part #:

EAP11723180

Availability:

In Stock - Ships Today

Price:

$62.28

Light bulb - 10w (bulb, light)

This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.

Easy Part #:

EAP11739347

Availability:

In Stock - Ships Today

Price:

$10.55

Screw (screw (6))

This screw is sold individually.

Easy Part #:

EAP11742743

Availability:

In Stock - Ships Today

Price:

$3.14

Ice bin coupling (coupling)

This part is located at the bottom of the ice bucket.

Easy Part #:

EAP11739762

Availability:

In Stock - Ships Today

Price:

$19.86

Cap, water filter (black)

This black water filter cap is located near the bottom kickplate.

Easy Part #:

EAP11739084

Availability:

In Stock - Ships Today

Price:

$20.95

Micro switch (switch)

This switch is located inside the dispenser.

Easy Part #:

EAP11738948

Availability:

In Stock - Ships Today

Price:

$11.19

Ice mold (mold & heater assembly (also order 542638 silicone grease))

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:

EAP11749915

Availability:

In Stock - Ships Today

Price:

$82.13

Water fill cup and bearing (bearing & inlet)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker is not making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:

EAP11743318

Availability:

In Stock - Ships Today

Price:

$22.89

Fan blade

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.

Easy Part #:

EAP11738973

Availability:

In Stock - Ships Today

Price:

$18.19

Icemaker motor kit (module assembly (includes items 9 & 10))

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

Easy Part #:

EAP733947

Availability:

In Stock - Ships Today

Price:

$86.27

Stripper arm kit (ice stripper)

This kit includes the stripper arm and fill cup.

Easy Part #:

EAP2378115

Availability:

In Stock - Ships Today

Price:

$28.68

1-15 of 244