1069700586 Kenmore Refrigerator Parts List

Search the entire 1069700586 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 ... 13
1-15 of 195

Replacement ice maker (icemaker)

This 8-cube ice maker is used to help produce ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze the water until ice cubes are formed. Once the water has been frozen the ice cubes will be ejected from the mold into the ice bucket and will refill with water to repeat the process until the ice bucket is full. This ice maker does not include the bail or shut off arm. You can reuse the arms for your old ice maker or you can also order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. This ice maker will not fit refrigerators that have the ice auger mounted on the door. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Easy Part #:
EAP358591
Availability:
In Stock
Price:
$111.50

Defrost timer (timer)

This 120 volt, 60Hz defrost timer acts like a clock, continually advances and alternates between activating the cooling cycle and the defrost heater. If the refrigerator is too warm, freezer section too warm or freezer not defrosting you might need to replace the defrost timer. This is a genuine OEM part. Disconnect the power to the refrigerator before starting the repair.

Easy Part #:
EAP11723171
Availability:
In Stock
Price:
$32.20

Icemaker control assembly (motor mold)

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.

Easy Part #:
EAP2341896
Availability:
In Stock
Price:
$80.09

Condenser fan motor kit (motor kit)

This condenser fan motor is used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This part also helps to evaporate excess water in the drain pan. If your refrigerator/freezer section is too warm you may need to replace this part. This is a genuine OEM part. Please remember to disconnect the power to your refrigerator before starting the repair.

Easy Part #:
EAP395284
Availability:
In Stock
Price:
$58.77

Capacitor (production capacitor)

The run capacitor is attached to the compressor. This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:
EAP11757023
Availability:
In Stock
Price:
$51.01

Door shelf end cap set (endcap trim)

This door shelf end cap set contains two white end caps. Each end cap can be used as either the right or the left side. These end caps also come with adhesive strips and an instructions sheet.

Easy Part #:
EAP370794
Availability:
In Stock
Price:
$17.00

Screw

This screw is half an inch long. It is made of metal and is intended for use with ranges, refrigerators, and washing machines.

Easy Part #:
EAP12349731
Availability:
In Stock
Price:
$19.34

Stud-shelf (stud shelf 5)

This is a 12 piece kit.

Easy Part #:
EAP16730711
Availability:
In Stock
Price:
$25.34

Ice maker water fill tube kit (fitting)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10-inches long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Easy Part #:
EAP11739222
Availability:
In Stock
Price:
$9.44

Door shelf end cap set (endcap trim)

This door shelf end cap set contains two white end caps and adhesive tape.

Easy Part #:
EAP358766
Availability:
In Stock
Price:
$18.84

Touch-up paint - white (tuchup)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:
EAP385132
Availability:
In Stock
Price:
$7.07

Bimetal defrost thermostat (bimetl-def)

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

Easy Part #:
EAP11742474
Availability:
In Stock
Price:
$38.80

Evaporator fan motor kit (motor evaporator)

The evaporator fan motor is in the back of the freezer section and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. It is suggested to replace the thermistor when replacing the evaporator fan. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Easy Part #:
EAP376645
Availability:
In Stock
Price:
$60.93

Single outlet water valve kit (inlet valve)

When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making/dispensing ice, not dispensing water, or leaking, you may need to replace the water inlet valve. The water inlet valve is in the back section of your refrigerator and will need to be pulled out from the wall. Make sure to disconnect both the water and power supply before starting your repair. The manufacturer has redesigned the valve; it may appear different than the original. The updated valve has a new quick connection. To install the updated valve, cut the retaining nut off the existing water line and gently push into the new valve. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:
EAP358631
Availability:
In Stock
Price:
$30.16

Ice mold

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:
EAP11749915
Availability:
On Order
Price:
$129.08
< PREV 1 2 3 4 5 6 ... 13
1-15 of 195