1069750580 Kenmore Refrigerator Parts List

1-15 of 184

Refrigerator crisper drawer (crisper pan)

The crisper drawer with humidity control allows you to adjust the humidity within the crisper. By adjusting the humidity, it will extend the life of your produce. The crisper drawer is made of clear plastic, measures 13 1/2” wide and 18 1/2” deep. The drawer does not include the white trim on the front. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP11731260
Availability:
In Stock
Price:
$87.13

Defrost timer (timer, defrost)

This 120 volt, 60Hz defrost timer acts like a clock, continually advances and alternates between activating the cooling cycle and the defrost heater. If the refrigerator is too warm, freezer section too warm or freezer not defrosting you might need to replace the defrost timer. This is a genuine OEM part. Disconnect the power to the refrigerator before starting the repair.

Easy Part #:
EAP11723171
Availability:
In Stock
Price:
$32.57

Icemaker control assembly (module assembly (incl. 38))

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.

Easy Part #:
EAP2341896
Availability:
In Stock
Price:
$81.02

Refrigerator single water inlet valve (valve solenoid)

The single water inlet valve is used to supply water to the water dispenser and the ice maker. The valve is 60Hz 120 Volts and 35 watts. If your ice maker isn’t producing ice or the water dispenser not dispensing water, the solenoid might have gone bad and will need to be replaced. This valve includes 1/4” tubing and a plastic union. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the refrigerator before starting the repair.

Easy Part #:
EAP11740365
Availability:
In Stock
Price:
$48.65

End cap trim piece (plug, trim)

The end cap trim piece slides into the door trim to help hold the door shelf stay in place. When installing the new end cap trim piece, make sure the two small taps are facing up. This part can be used for the left or right side. The end cap trim piece is white in color, made of plastic and almost 2” long. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP11738928
Availability:
In Stock
Price:
$11.22

Refrigerator door switch (rocker arm switch)

Door switch turns the light off when you close the door.

Easy Part #:
EAP12728638
Availability:
In Stock
Price:
$32.07
Easy Part #:
EAP11739204
Availability:
In Stock
Price:
$14.55

Crisper drawer glass (glass, crisper cover)

Frame Not Included. Glass Only.

Easy Part #:
EAP11739007
Availability:
In Stock
Price:
$116.27

Bimetal defrost thermostat (defrist bimetal)

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

Easy Part #:
EAP11742474
Availability:
In Stock
Price:
$38.80

Crisper cover frame (crisper cover)

This is just the frame. The glass is sold separately.

Easy Part #:
EAP11740350
Availability:
In Stock
Price:
$108.50

End cap trim - white (plug, trim)

This part is the replacement end cap trim for your refrigerator. It is made of white plastic and is approximately 1 inch wide, 1 inch long, and ½ inch thick. This part can also be known as the shelf support retainer as it holds the shelf support in place. If the end cap trim is damaged, the shelf support may not remain in place and you will not be able to store items in your refrigerator door. To replace the end cap trim, carefully disconnect it from both the refrigerator door and the shelf support. Then, snap the new end cap trim into the shelf support and then to the door. This part is sold individually and is an authentic OEM part.

Easy Part #:
EAP11738929
Availability:
In Stock
Price:
$10.41

Condenser fan motor (motor, condenser)

NOTE: As per the manufacture the part does not come threaded. A self tapping screw will need to be used to make threads.

Easy Part #:
EAP11723170
Availability:
In Stock
Price:
$157.88

Screw

Sold individually.

Easy Part #:
EAP11742744
Availability:
In Stock
Price:
$7.49

Door shelf trim (trim, door shelf)

Also known as door retainer bar. End caps are not included. White in color. Part needs to be cut to proper length.

Easy Part #:
EAP11739547
Availability:
In Stock
Price:
$52.61

Ice mold (mold and heater assembly, also order 542638 silicone grease)

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:
EAP11749915
Availability:
On Order
Price:
$130.58
1-15 of 184