1108293130 Kenmore Washer Parts List

1-15 of 130

Agitator directional cogs (washing machine agitator directional cogs. These parts are also referred to as "dog ears." 4 per package.)

These agitator directional cogs are commonly referred to as dog ears. They come four in a package and are usually used with direct drive washing machines. When the teeth on the outer edge are worn down the cogs will not engage with the upper agitator, causing it not to agitate properly. It is recommended to replace all four at the same time. These agitator directional cogs are ?-inch high and 1-inchlong and they are a genuine OEM part.

Easy Part #:
EAP388034
Availability:
In Stock - Ships Today
Price:
$4.09

Water inlet valve with mounting bracket (washing machine water inlet valve kit with bracket. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disa)

The water fill valve kit attaches the water lines on the back of your washer. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. This kit includes a blue body fill valve, a mounting bracket and a screw. The valve body of this part could be blue or green in color. There are two ports for water to enter, and this valve is compatible with a half inch ID hose. It has two 3/4-11x1/2 NHT hose threads. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:
EAP334646
Availability:
In Stock - Ships Today
Price:
$32.08

Timer knob (improved washer timer knob with metal threads and chrome center.)

This replacement timer knob is black with a chrome center. Use this improved timer knob with its metal threads for your clothes washer. Colors Almond, Toast and Platinum are discontinued.

Easy Part #:
EAP11741232
Availability:
In Stock - Ships Today
Price:
$37.87

Agitator bolt (washer agitator bolt with rubber gasket and thread sealant. Head is 7/16 inches in diameter.)

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

Easy Part #:
EAP11741866
Availability:
In Stock - Ships Today
Price:
$6.56

Agitator repair kit (washing machine agitator repair kit with reversing dog ears and, long cam, and retainer.)

This agitator repair kit comes with a long cam, a thrust spacer and four dogs ears (agitator cogs). This repair kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover). This part has been updated by the manufacture.

Easy Part #:
EAP334622
Availability:
In Stock - Ships Today
Price:
$33.94

Centerpost gasket (washing machine main tub seal)

Also known as Main Outer Tub Seal. This part helps to prevent leaking from the bottom of the tub.

Easy Part #:
EAP11723081
Availability:
In Stock - Ships Today
Price:
$5.37

Lid switch assembly (washing machine lid switch assembly. If the washer does not spin the lid switch may be defective.)

This part makes sure that the lid is shut before allowing the machine to start or agitate.

Easy Part #:
EAP334600
Availability:
In Stock - Ships Today
Price:
$37.12

Thrust spacer (thrust washer for washing machine agitator. This thrust washer is found between the upper and lower sections of the agitator.)

This white thrust spacer is made of plastic and is also commonly referred to as a retainer ring. It is approximately 2 1/2-inch in diameter. The thrust spacer is used in the agitator assembly between the agitator and the auger. The thrust spacer supports the agitator auger as it moves. It is used in many direct drive washer machine models. If your washer will not agitate or is noisy, you may need to replace the thrust spacer. Please be sure to disconnect the power to your washer before starting your repair. You may need agitator grease for the repair. This is a genuine OEM part.

Easy Part #:
EAP334562
Availability:
In Stock - Ships Today
Price:
$6.37

Foot, front - single (adjustable leveling leg for washing machine. This leveling leg has a rubber foot.)

The adjustable leveling leg is used to support and keep your washer level. It also allows you to adjust the height of your washer. If your washer is shaking, vibrating, or moving during operation you may need to replace this part. This part has a rubber foot, almost 3” long and is made of metal and rubber. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP11747965
Availability:
In Stock - Ships Today
Price:
$6.94

Touch-up paint - white (white touch-up paint)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:
EAP385132
Availability:
In Stock - Ships Today
Price:
$7.07

Lid bumper (bumper for lid)

This single gray and white washer lid bumper contains a rubber bottom to help cushion the lid as it closes against the cabinet lid. If your bumper is missing you should replace the part to avoid metal on metal causing damage to the top of the washer. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP11747040
Availability:
In Stock - Ships Today
Price:
$7.40

Lid hinge mounting screw (screw, 6-32x.340 flat)

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

Easy Part #:
EAP11748588
Availability:
In Stock - Ships Today
Price:
$9.83

Drain hose (connector, drain hose)

It connects from the pump to the back panel. The clamp is not included.

Easy Part #:
EAP11753688
Availability:
In Stock - Ships Today
Price:
$31.95

Bleach dispenser - white (bleach dispenser cup.)

This part holds the bleach until it is ready to be released into the cycle.

Easy Part #:
EAP11741235
Availability:
In Stock - Ships Today
Price:
$8.79
1-15 of 130