Parts for Kenmore Models 11074650110

Agitator bolt (screw and washer)

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

Easy Part #:: EAP11741866

Availability:: In Stock

Price:: $6.56

Centerpost gasket (gasket, center post)

Also known as Main Outer Tub Seal. This part helps to prevent leaking from the bottom of the tub.

Easy Part #:: EAP11723081

Availability:: In Stock

Price:: $5.37

Lid switch (switch)

The door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open. The dryer cannot operate until the door switch signals that the door is closed. If your dryer will not start or the switch shorted out, your washer will not operate and the switch will need to be replaced. This switch is a genuine OEM part. Please remember to disconnect power to the dryer before starting the repair.

Easy Part #:: EAP11723153

Availability:: In Stock

Price:: $22.04

Lid bumper (bumper)

This single gray and white washer lid bumper contains a rubber bottom to help cushion the lid as it closes against the cabinet lid. If your bumper is missing you should replace the part to avoid metal on metal causing damage to the top of the washer. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP11747040

Availability:: In Stock

Price:: $7.40

Lid hinge mounting screw (screw)

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

Easy Part #:: EAP11748588

Availability:: In Stock

Price:: $9.83

Lid hinge bearing (bearing, hinge)

This is the bearing for the lid hinge. Sold individually.

Easy Part #:: EAP11738874

Availability:: In Stock

Price:: $10.33

Hose clamp (clamp)

This single hose clamp is used to hold the water hose in place on the pump, to avoid the hose or pump from leaking water. If you notice your washer leaking you may need to replace the clamp. Please remember to disconnect the power and water supply before starting your repair. This is a genuine OEM part.

Easy Part #:: EAP11740613

Availability:: In Stock

Price:: $10.33

Washer transmission stem seal (seal, shaft)

Sold individually.

Easy Part #:: EAP11746747

Availability:: In Stock

Price:: $10.33

Dryer screw (screw)

11-16 x 3/4 Sold individually.

Easy Part #:: EAP11748297

Availability:: In Stock

Price:: $7.40

Lid hinge pad (hinge pad)

Sold individually.

Easy Part #:: EAP11738862

Availability:: In Stock

Price:: $10.08

Lid switch actuator assembly (strike, lid)

This part is used to activate the lid switch when the lid opens/closes.

Easy Part #:: EAP347797

Availability:: No Longer Available

Hose clamp (clamp)

This clamp helps to prevent leaking by holding the end of water hose in place.

Easy Part #:: EAP11741854

Availability:: In Stock

Price:: $6.43

Lid switch actuator (switch actuator)

This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.

Easy Part #:: EAP11741878

Availability:: No Longer Available

Two port water pump (pump assembly complete)

This 2-port drain pump is used to remove the water from the tub during the drain cycle. This drain pump has been updated by the manufacturer and now replaces all the belt-driven washers with the two hose ports. It may appear different but will function the same as the original pump. If your washer is not draining, you may need to replace the pump. This pump is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.