1197498893 Kenmore Range Parts List

Flat style oven igniter (bake ignitor)

The flat-style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter, be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3.72-inch in length and the amperage range is 3.2 to 3.6. This is a genuine OEM part.

Light bulb (oven light bulb)

This 40-watt light bulb has a standard screw-in base and is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.

Lens (oven light cover)

This is an oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover protects the light bulb from being damaged. The main reason to replace the light lens cover is if it is cracked, damaged, or missing. Make sure the lens cover is cool to the touch before you begin this repair. To remove the lens cover, simply turn it counter clockwise until you can remove it. Replace it with a new cover and turn it clockwise to lock it into place. This is an OEM part sourced from the manufacturer, and it is sold individually.

Drip bowl - 8" (burner bowl)

Sold individually.

Oven light socket (oven light receptacle)

The light socket is located inside the oven cavity to provide power to the light while holding the light bulb in place. If the light bulb is not working, the switch might have failed and will need to be replaced. This is a genuine OEM part. Please remember to disconnect power to the oven before starting your repair.

Hinge - right side (right)

Door hinge - left side (left)

This hinge is located on left side of the oven door.

Spark module - 120v (spark module)

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Screw - flat head (8 - 18 x 1/2 screw)

Sold individually.

Screw (10 x 1/2 screw)

Sold individually.

Grate (top grate)

Sold individually.

Leveling leg (leveling bolt (4 req'd))

Sold individually.

Flat style oven igniter (broil ignitor)

This flat style gas oven igniter is 5.53 inches long and comes with a bracket and wire nuts. Its amperage range is between 3.2 and 3.6 amps. May be different in appearance but will function as the orginal part.

Spring (oven door spring)

Griddle