25344352408 Kenmore Refrigerator Parts List

1-15 of 286

Crisper cover support - front (crisper support)

This crisper cover support mounts to the inside of the cabinet wall to support the front crisper cover. The support is held in place by a locking pin. If your shelf is not level or the drawer is not opening and closing properly you may need to replace this part. This is a genuine OEM part and is sold individually

Easy Part #:
EAP2358880
Availability:
In Stock
Price:
$3.89

Crisper support - rear (crisper support)

This rear crisper cover support mounts to the inside of the cabinet wall to support the rear crisper cover. The support is held in place by a locking pin. If your shelf is not level or the drawer is not opening and closing properly, you may need to replace this part. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP2358879
Availability:
In Stock
Price:
$7.43

Refrigerator water inlet valve (water valve)

When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making or dispensing ice, not dispensing water, or leaking, you may need to replace the water inlet valve. The water inlet valve is in the back section of your refrigerator and will need to be pulled out from the wall. Make sure to disconnect both the water and power supply before starting your repair. NOTE: This part may appear different than the original but is an authorized manufacturer replacement.

Easy Part #:
EAP7784018
Availability:
In Stock
Price:
$90.98

Refrigerator crisper drawer (crisper pan)

The crisper drawer in your refrigerator is designed to control humidity and keep food fresh for as long as possible. These drawers get a lot of day-to-day use and they crack, warp, or stain over time. This is an official replacement part, it is clear plastic, and designed for side-by-side refrigerators. This repair is as simple as removing the old drawer, and lining the new drawer up with the existing tracks and sliding it into place. It is important to note that new pan does not have the humidity control slide, and this component is now sold separately.

Easy Part #:
EAP2361214
Availability:
In Stock
Price:
$102.49

Hinge bearing (closer hinge bearing)

Sold individually. Also known as a short door closing cam.

Easy Part #:
EAP429803
Availability:
In Stock
Price:
$12.41

Crisper drawer cover - no glass (crisper cover)

This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.

Easy Part #:
EAP2361213
Availability:
In Stock
Price:
$63.89

Door closing cam (plate)

Sold individually. This cam is located at the bottom of the fridge/freezer door.

Easy Part #:
EAP430814
Availability:
In Stock
Price:
$37.84

Light bulb (lamp bulb)

This 40-watt light bulb has a standard screw-in base and is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.

Easy Part #:
EAP12751166
Availability:
In Stock
Price:
$12.77

Meat pan cover frame - glass not included (cover-meat p)

Glass insert must be ordered separately.

Easy Part #:
EAP2378645
Availability:
On Order
Price:
$64.89

Run capacitor (capacitor)

The run capacitor, with new crimp wire connectors, is attached to the compressor and is 250 volts. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If your refrigerator is too warm, will not start, or your freezer section is to warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:
EAP2333670
Availability:
In Stock
Price:
$53.48

Upper crisper drawer frame (cover)

Frame ONLY. Glass must be ordered separately.

Easy Part #:
EAP899475
Availability:
In Stock
Price:
$124.55

Rear-mount ice maker assembly (icemaker kit)

This kit includes the ice maker, power cord, bail arm, and fill cup. If your ice maker is not making or dispensing ice, or you notice a leak, you may need to replace the rear-mount ice maker assembly. This ice maker mounts to the back panel in the freezer section of the side-by-side refrigerator. If you are having an issue with the arm of this kit hitting the shelf, you will have to replace the shelf. You can find the shelf by searching EAP1152582. To complete this repair, you will need a 1/4-inch nut driver and a small flat blade screwdriver.

Easy Part #:
EAP1992700
Availability:
In Stock
Price:
$110.67

Dispenser crusher housing (housing)

The ice crusher housing covers the ice crusher blades inside your ice container, located in the freezer. If the housing is damaged or the auger is getting jammed up and not dispensing ice, you may need to replace the ice crusher housing. This part is white in color and made of plastic. This is a genuine OEM part. Disconnect the power to the refrigerator before starting your repair.

Easy Part #:
EAP2378689
Availability:
In Stock
Price:
$50.61

Water filter housing - does not include elbow connectors (housing)

O-Ring is not included with this part. Does not come with Elbow Connectors.

Easy Part #:
EAP899353
Availability:
In Stock
Price:
$49.66

Defrost thermostat kit (thermostat)

This kit includes the clip, leads and heat shrink.

Easy Part #:
EAP469522
Availability:
In Stock
Price:
$18.02
1-15 of 286