2539305193 Kenmore Refrigerator Parts List

Defrost timer - 60hz 120v (timer)

This 60Hz 120V defrost timer will cycle for thirty minutes after every eight hours of run time. You can turn the dial on the defrost timer clockwise to be able to advance it in and out of defrost mode. The defrost timer helps melt away any ice that may have built up on the evaporator coils. If your refrigerator/freezer is too warm or too cold, will not advance into the defrost cycle, freezer will not defrost, or it runs too long, the defrost timer may be defective and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Refrigerator ice maker assembly (mold-body assy, with heater)

The ice maker assembly is used to produce ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. This kit includes the fill cup, 4 pin wire harness adapter and tube. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Replacement ice maker (motor assy)

This ice maker is the replacement heat-release unit only. This kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that converts the harness to three round female and one round male connectors. This is a genuine OEM part. Please make sure you disconnect the power to the refrigerator before starting your repair.

Light bulb (light bulb/lamp)

This 40-watt light bulb has a standard screw-in base and is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.

Fresh food door gasket (gasket-refr door, magnetic)

This white gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Defrost thermostat (thermostat-defrost)

The defrost thermostat snaps onto the top portion of the evaporator. It acts as a safety device and protects the evaporator from overheating during the defrost cycle. The thermostat can sense the rise in the evaporator temperature during the defrost cycle and cycles the defrost heater off after all the frost is melted from the coils. This limiter thermostat will cut out when the temperature inside your refrigerator reaches 55 degrees Fahrenheit and kicks back in when the internal temperature drops to 20 degrees Fahrenheit. The defrost thermostat may need to be replaced if the appliance is experiencing temperature-related issues. This is a genuine OEM part. It is recommended to disconnect the power to your appliance before starting your repair.

Evaporator fan blade (fan blade)

If your refrigerator or freezer is too warm or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.

Evaporator fan motor kit (motor-fan)

The evaporator fan motor is in the back of the freezer section and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which then circulates the cold air from the freezer section to the fresh food section. It is suggested to replace the thermistor when replacing the evaporator fan. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Door shelf retainer bar end cap - left side (support-door rack,lh,(4))

Hexagonal screw (screwet-upper hinge mtg,hex head,1/4-20 x 5/8)

Sold individually.

Table-type freezer wire shelf (shelf-freezer, "(table style)")

Sold individually. NOTE: For 18 cubic feet refrigerator model order part # 240358005 for the shelf and part# 3201150 end caps, quantity 4.

Freezer door gasket (gasket-frzr door, magnetic)

This white door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Door shelf retainer bar end cap - right side (support-door rack,rh,(4))

This white end cap is designed for the right side of your refrigerator door shelf retainer bar.

Light socket (socket-light/lamp)

Drive gear (gear)

This icemaker drive gear works in conjunction with the ejector blades. The gear helps rotate the ejector arm to push the ice from the ice maker in to the ice bin. If your ice maker is not dispensing ice you may need to replace this part. The gear is little over an inch in diameter, white, and made of plastic. Please remember to disconnect the power and water supply before starting your repair. This is a genuine OEM part.