36362709200 Kenmore Microwave Parts List

Drive motor

This motor rotates the glass turntable in the microwave to aid in even cooking temperatures. If your cooking tray is not rotating or making noises you may need to replace the motor. This motor accepts a D-shaped shaft, has 21 volts, and is a genuine OEM part. Please remember to disconnect the power to the microwave before starting the repair.

Secondary door switch

The secondary door switch, also known as a micro switch, works in conjunction with your microwave by monitoring the door latch position and sending communication to the electronic control board to let it know if the latch is open or closed. When the door is shut, the door switch will close to send power to the microwave to operate. If the microwave won’t start, the switch has failed, and the part will need to be replaced. You can test the switch for continuity. This part measures 1.5” L x .75” W. Due to the high voltage capacitor in the microwave, it can retain a lethal electrical charge, even when unplugged, it is suggested to have a service technician install the part. Please disconnect power to the microwave before beginning the repair. This is a genuine OEM part.

Door handle (handle)

Screws NOT included.

Turntable coupler

This turntable motor coupler connects the turntable motor to the turntable tray to activate the tray. If your tray does not consistently turn or does not turn at all, replace this part. This part measures 1 1/2" in diameter. Remember to unplug your microwave from the power source as a safety precaution. Refer to the openers manual provided by the manufacturer for further installation instructions and accurate guidance.

Fuse

The line fuse, also known as a ceramic fuse, is used to protect your microwave when there is a power serge by shutting down the microwave to avoid damage. If your microwave has no heat, won’t turn on, or the touch pad is not working properly, you may need to replace the fuse. This part measures approximately 1.25” long and is sold individually. Please remember to disconnect power to the microwave before starting the repair. This is a genuine OEM part.

Monitor door switch (monitor switch)

The door interlock switch (normally closed) works in conjunction with your microwave operation. The switch will prohibit the microwave from starting when the microwave door is open. If your microwave won’t turn on or there is no heat you may need to replace the switch. This part measures 1.5” L x .75” W, 250 volts, is black in color with a red dot and is sold individually. Please remember to disconnect the power before starting your repair. This is a genuine OEM part.

Charcoal filter

This vent hood filter collects grease particles in the air from cooking. Sold individually.

Flat cab mounting bolt (flat bolt)

The flat cab mounting bolt is used to secure your microwave to your cabinet. The bolt is approximately 4 inches long. The main reason you would need to replace this bolt is if the old bolt is stripped or missing, and the microwave will not stay secure in the cabinet. This is a genuine OEM part and it is sold individually.

Microwave mounting plate (mounting plate)

This plate mounts the microwave under the cabinet.

Grille screw

Vent grille (grille)

This black vent grille mounts on the top of the microwave above the door. Screws are NOT included.

Hood damper assembly (hood damper)

Thermal fuse (thermostat)

Lock button

The stirrer fan cover clip, also known as a lock button, works in conjunction with the microwave by holding the stirrer fan cover in place inside of the microwave. If the clip has broken or is lost you will need to replace the clip. This part is made of plastic, is white in color and is sold individually. This is a genuine OEM part.

Hood thermostat (thermostat)