41779042900 Parts List

1-15 of 100

Drum belt (dryer drum belt, length 87.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has br)

This dryer drum belt is 88 3/4 inches long, and is 1/4 inch wide. The belt attaches to the motor pulley and helps rotate the drum as the motor rotates. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP1148434

Availability:

In Stock - Ships Today

Price:

$13.33

Rear drum bearing kit (dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate.)

This rear drum bearing kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws. The support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time the drum bearing will wear out. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:

EAP459829

Availability:

On Order

Price:

$17.12

Upper drum glide (front upper felt glide pad. Includes nylon glides, adhesive, and installation instructions. These drum glides help to support the front of the dryer d)

The upper drum felt glide kit helps to support the front drum as it rotates smoothly and quietly while operating. This kit includes three glides with the adhesive. If your dryer won’t tumble or is noisy, the glide could be worn down causing you to hear a metal on metal noise and will need to be replaced. The drum glide is a genuine OEM part and sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP470317

Availability:

In Stock - Ships Today

Price:

$23.70

Drum support bearing (rear bearing support for dryer drum.)

The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP418807

Availability:

In Stock - Ships Today

Price:

$3.25

Front lower drum seal (lower felt seal, dryer drum front)

This part helps to keep the dryer running as quietly as possible.

Easy Part #:

EAP460194

Availability:

In Stock - Ships Today

Price:

$23.16

Turn - type start switch (start switch, turn type)

This part is used to start the dryer once you have selected a setting on the timer.

Easy Part #:

EAP975832

Availability:

In Stock - Ships Today

Price:

$27.32

M series ignition coil kit (dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils ma)

The gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If it takes too long to dry or there is no heat, the coils may be bad and will need to be replaced. When the coils go bad they will not hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP470049

Availability:

In Stock - Ships Today

Price:

$16.43

Dryer drum bearing bracket (bracket bearing support)

This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing

Easy Part #:

EAP12579101

Availability:

In Stock - Ships Today

Price:

$5.75

Lint filter (lint filter assembly)

This white dryer lint filter screen collects lint as it passes through the dryer vent.

Easy Part #:

EAP417841

Availability:

In Stock - Ships Today

Price:

$18.61

Drive motor with pulley

This motor has a double shaft.

Easy Part #:

EAP418132

Availability:

In Stock - Ships Today

Price:

$105.86

Door handle (door handle, white)

This part is the replacement door handle for your dryer. It is made of white plastic and measures about 2 ½ inches long and 4 inches wide. The door handle allows you to open and close the dryer door. If it is cracked, damaged, or missing, this is the part that will replace it. Many of our customers rated this repair easy, as the new handle should simply snap into place. This is an OEM part sourced directly from the manufacturer.

Easy Part #:

EAP418388

Availability:

In Stock - Ships Today

Price:

$27.93

Screw

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Easy Part #:

EAP417463

Availability:

In Stock - Ships Today

Price:

$6.77

Idler arm assembly (idler pulley assembly for dryer drum belt)

Part may differ in color from image. Please note that this is only a cosmetic difference.

Easy Part #:

EAP1156706

Availability:

In Stock - Ships Today

Price:

$30.51

Screw (screw, pan head)

Sold individually.

Easy Part #:

EAP417085

Availability:

In Stock - Ships Today

Price:

$7.70

Easy Part #:

EAP459766

Availability:

In Stock - Ships Today

Price:

$9.27

1-15 of 100