41797804792 Parts List

1-15 of 207

Drum belt (belt-dryer)

This dryer drum belt is 88 3/4 inches long, and is 1/4 inch wide. The belt attaches to the motor pulley and helps rotate the drum as the motor rotates. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP1148434

Availability:

In Stock - Ships Today

Price:

$13.33

Upper drum glide (glide-drum)

The upper drum felt glide kit helps to support the front drum as it rotates smoothly and quietly while operating. This kit includes three glides with the adhesive. If your dryer won’t tumble or is noisy, the glide could be worn down causing you to hear a metal on metal noise and will need to be replaced. The drum glide is a genuine OEM part and sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP470317

Availability:

In Stock - Ships Today

Price:

$23.70

Drum support bearing (bearing-shaft)

The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP418807

Availability:

In Stock - Ships Today

Price:

$3.25

Dryer lint screen (trap-lint)

This dryer lint screen is for laundry centers. Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer. Follow the instructions in the owner's manual when installing this part.

Easy Part #:

EAP12585473

Availability:

In Stock - Ships Today

Price:

$27.80

Drive v-belt (belt-washer)

This drive belt is designed to ride on the pulley until the basket gets up to speed. If your washer drum will not agitate or spin, you may need to replace your belt. It is recommended to disconnect the power to your washer and shut off the water supply before you start your repair. This drive belt is a genuine OEM part.

Easy Part #:

EAP1146950

Availability:

In Stock - Ships Today

Price:

$14.43

Front lower drum seal (seal-basket lower)

This part helps to keep the dryer running as quietly as possible.

Easy Part #:

EAP460194

Availability:

In Stock - Ships Today

Price:

$23.16

Door catch (catch-door)

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close, you may need to replace the door catch. This is a genuine OEM part. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:

EAP418433

Availability:

In Stock - Ships Today

Price:

$31.73

Heater assembly (heater-hsg assembly)

This dryer heating assembly has 5/16" terminal on the housing.

Easy Part #:

EAP2378363

Availability:

In Stock - Ships Today

Price:

$92.54

Ball hitch (shaft assembly)

If your dryer is noisy, not starting, or is not tumbling, you may need to replace the ball hitch. This part supports the back wall of your dryer and helps reduce friction as the drum spins. The part measures 5-inch in diameter and is made from metal. It is also available as part of a kit.

Easy Part #:

EAP418736

Availability:

In Stock - Ships Today

Price:

$47.36

High limit thermostat (thermostat-safety)

The two-terminal high limit thermostat has a limit of 260 degrees Fahrenheit and acts as a safety mechanism that keeps the dryer from overheating. The thermostat will cut out when the internal dryer temperature reaches 260 and then cuts back in when the temperature drops by 70 degrees Fahrenheit. If your dryer is not heating, you may need to replace the thermostat. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP446428

Availability:

In Stock - Ships Today

Price:

$52.80

Easy Part #:

EAP1152204

Availability:

In Stock - Ships Today

Price:

$9.09

Remote style pump with motor (pump-complete)

Use this with either a top load or front load washer. This pump has an horizontal mount.

Easy Part #:

EAP417325

Availability:

In Stock - Ships Today

Price:

$75.87

Water inlet valve (valve-water)

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. If your washer will not stop filling with water, is leaking, or will not fill with water, you may need to replace the water inlet valve. Please make sure to disconnect the power to your washer before you start your repair. This water inlet valve is a genuine OEM part.

Easy Part #:

EAP815509

Availability:

In Stock - Ships Today

Price:

$25.14

Dryer drum bearing bracket (bracket-bearing)

This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing

Easy Part #:

EAP12579101

Availability:

In Stock - Ships Today

Price:

$5.75

Tub seal assembly (seal-tub)

This tub seal helps prevent any leaking around the transmission of your washer. If your washer is leaking you may need to replace the seal. The tub seal is located on the bottom of the outer tub, in the center where the transmission comes through to connect to the agitator. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:

EAP459481

Availability:

In Stock - Ships Today

Price:

$45.25

1-15 of 207