7917898815 Kenmore Range Parts List

Rear drawer glide (glide)

This rear drawer glide is for your bottom range drawer. As the broiler drawer slides back and forth, these glides prevent metal-to-metal contact. If you are having trouble opening/closing the broiler drawer, the glide may be broken and will need to be replaced. This is a genuine OEM part and is sold individually.

Flat style oven igniter (Uni.Ignitor)

The flat-style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter, be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3.72-inch in length and the amperage range is 3.2 to 3.6. This is a genuine OEM part.

Drip pan (chrome pan)

This round chrome drip pan contains a center hole of approximately four inches wide.

Light bulb (bulb)

This 40-watt light bulb has a standard screw-in base and is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.

Lens

This is an oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover protects the light bulb from being damaged. The main reason to replace the light lens cover is if it is cracked, damaged, or missing. Make sure the lens cover is cool to the touch before you begin this repair. To remove the lens cover, simply turn it counter clockwise until you can remove it. Replace it with a new cover and turn it clockwise to lock it into place. This is an OEM part sourced from the manufacturer, and it is sold individually.

Burner grate (grate)

Sold individually.

Screw

This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.

Oven light socket (light socket)

The light socket is located inside the oven cavity to provide power to the light while holding the light bulb in place. If the light bulb is not working, the switch might have failed and will need to be replaced. This is a genuine OEM part. Please remember to disconnect power to the oven before starting your repair.

Control knob (knob control)

Sold Individually. This knob accepts a D-shaped shaft.

Gas spark ignition switch (switch)

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner

Spark module - 120v (spark module)

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Dual oven safety valve (valve)

Used for both bake and broil. This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

Flat style oven igniter broiler (Uni.Ignitor)

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

Thermostat control knob - black (knob)

This knob allows you to select the temperatures for your oven. This knob accepts a D-shaped shaft.

Oven bottom panel (bottom oven panel)