79571052014 Kenmore Refrigerator Parts List

Handle screw (refrigerator door handle mounting bolt)

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.

Plastic tube - 5/16 inch (refrigerator water tubing)

The 5/16” plastic water tubing attaches to the water inlet valve and goes into the refrigerator. The tubing supplies water to the water dispenser and the ice maker. If the tubing becomes damaged or cracked, it can cause water to leak out onto the floor and the water tubing will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power and water supply before starting the repair.

Refrigerator spring

This is a replacement door mullion spring for your refrigerator. The door mullion is the flap that allows the doors on your French-door style refrigerator to close. The spring allows the mullion to fit into a latch on the refrigerator door frame, and lets the door stay closed properly. If you have a damaged spring, your door will not close properly. This part is sold individually.

Refrigerator door bin

14 inches wide, 7-5/8 inches deep and 3-3/4 inches tall;

Glass shelf (refrigerator glass shelf)

This is the replacement shelf glass for your refrigerator. It is made of glass and is approximately 31 inches wide and 16 inches long. The shelf glass for your refrigerator slides over the crisper cover and acts as a sort of lid. It also creates a shelf that you can place food and beverages on. If your current shelf insert glass is broken, this part is the appropriate replacement. Many of our customers have described this repair as easy. To complete the repair, carefully remove the old glass from the frame and replace it with the new pane of glass. This part is sold individually and is an authentic OEM part.

Roller assembly (refrigerator freezer drawer roller)

Refrigerator flipper assembly

The main top guide pin guides the main top onto the body of the range and helps hold the top in position.

Spring,lever (refrigerator dispenser ice chute door hinge spring)

Ice maker assembly - 3 wire (refrigerator ice maker assembly)

NOTE: The Secondary (smaller) wire connector has 3 wires in it. If original ice maker has 6 wire connector see part number AEQ73110205. Please verify connector before ordering.

Refrigerator water reservoir

The water reservoir holds the water for the water dispenser as the water chills.

Gasket,door (refrigerator freezer door gasket)

Freezer door gasket is on the inner door panel and creates a seal around the door to prevent warm air from entering the freezer compartment.

Elbow (refrigerator water tube fitting)

Switch,micro (refrigerator dispenser switch)

Gasket assembly,door (refrigerator door gasket, right)

Basket assembly,door (refrigerator door bin)

Refrigerator door basket shelf bin assembly for some models of LG fridges. This is a genuine OEM item made by LG