79571322411 Kenmore Refrigerator Parts List

Refrigerator door bin

This door bin is for refrigerators. The door bin attaches to the inside of the refrigerator door and typically holds jars and bottles. Follow the instructions in the owner's manual for installing this part.

Refrigerator ice maker assembly

This ice maker assembly is for refrigerators. Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.

Evaporator fan motor (refrigerator evaporator fan motor)

This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. If the fresh food section is too warm or the motor has failed, you will need to replace the evaporator fan motor. It is suggested to replace the thermistor when replacing the evaporator fan. The fan motor is in the freezer section of the refrigerator, and includes the harness and plug. Please remember to disconnect the power to the refrigerator before starting your repair. This is a genuine OEM part.

Screw,set (refrigerator door handle mounting screw)

Leg assembly,adjust (refrigerator leveling leg)

Ring (refrigerator door hinge snap ring)

Damper,motor support (refrigerator motor support damper)

Capacitor,electric appli (refrigerator run capacitor)

Drier assembly (refrigerator filter dryer)

Refrigerator compressor overload protector

The compressor overload protector attaches to the compressor and shuts off the compressor if the compressor motor draws too much current.

Damper,motor support (refrigerator condenser fan motor damper)

Bucket,ice (refrigerator ice container)

Switch,push button (refrigerator door switch (white))

This part is the replacement push switch for your refrigerator. It is made of white plastic and is sold individually. The door switch turns the light on and off when you open the door, and it is also a safety mechanism that doesn’t allow the auger motor to come on and dispense ice when the door is open. To remove the switch, simply pry it out of position with a small flat head screwdriver, then disconnect the wires. Reconnect the wires to a new switch and snap it into place. Be sure to connect the wires to the switch in the correct order. This part is an authentic OEM part sourced directly from the manufacturer.

Slide rail - right side (refrigerator freezer drawer slide rail, right)

Roller assembly (refrigerator drawer roller)