79572023110 Kenmore Freezer Parts List

Handle screw (handle stopper)

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.

Plastic tube - 5/16 inch (tube)

The 5/16” plastic water tubing attaches to the water inlet valve and goes into the refrigerator. The tubing supplies water to the water dispenser and the ice maker. If the tubing becomes damaged or cracked, it can cause water to leak out onto the floor and the water tubing will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power and water supply before starting the repair.

Drawer roller (roller assembly)

Door stopper (stopper)

Screw,customized (screw)

Water inlet valve assembly (harness assembly)

This includes the primary and secondary valves along with the wire harness.

Tray assembly,vegetable (tray assy, v)

This is the replacement vegetable tray for your refrigerator. It is made of white and clear plastic and is approximately 22 inches long, 19 inches wide, and 12 inches deep. The vegetable tray slides into the refrigerator shelf and is used to store vegetables and other food items. The main reason to replace the vegetable tray is if yours is cracked, damaged, or missing. To replace the vegetable tray, simply slide the old pan out, and slide the new one into place. This is an OEM part sourced directly from the manufacturer and is sold individually.

Primary water valve - single coil (water valve)

Door gasket - left side (gasket assembly)

This door gasket assembly is for the left refrigerator door. The gasket attaches on the inner door panel to create a seal around the door to keep the cool air inside and avoid the warm air from entering. If your gasket is torn or no longer sealing the door it will need to be replaced. This gasket is gray in color, made of rubber and measures 18” x 40”. To smooth the creases and folds in the new gasket, soak it in warm water and let it dry. You can also try carefully warming it with a hair dryer or heat on a low setting, but be careful not to melt the gasket. This is a genuine OEM part.

Door gasket - right side (gasket assembly)

Refrigerator ice bin (bucket assembly)

This ice bin is for refrigerators. Ice bin stores ice cubes in the freezer section of the refrigerator. Follow the instructions in the owner's manual when installing this part.

Shelf frame assembly - white (cover assembly)

Note: Frame no longer includes rollers and screws. May be ordered separately.

Roller assembly

Cam,shaft (cam)

Cam,shaft (cam)

The door latch cam, also known as a hinge lever, latches the door when you close it. The latch cam attaches to the left side flipper seal cover to catch the pivot guide in the refrigerator to keep the doors closed. This part is approximately 2 1/2” long, white in color, made of plastic and is for the left side. This is a genuine OEM part and is sold individually.