9113022192 Kenmore Range Parts List

Round style oven igniter (igniter-broiler and oven burner)

The round style oven igniter ignites the gas to light the oven burner to produce heat for your range. The igniter measures approximately 3 1/2” in length and the amperage range is 2.5 to 3.0. If the element has shorted out, no longer glowing, or glowing but only orange or red when it needs to be white, you will need to replace the oven igniter. When replacing the igniter please be very careful not to touch the gray element part of the igniter as it is very fragile. This igniter can replace igniters for either the broil or bake burners; it does not replace the flat-style igniters. The igniter includes two high-temperature wire connectors. This is a genuine OEM part. Please make sure to disconnect the power and shut off the gas supply before starting your repair.

Oven sensor (sensor)

The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is a genuine OEM part. If your oven is too hot, not heating evenly, has little to no heat when baking, or is flashing F3/F4 error messages on your control board, you may need to replace it. Make sure to disconnect the power to your range before starting your repair.

Light bulb - 40w (oven lamp)

This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.

Screw (screw 10-16 x 7/16")

Sold Individually.

Ignitor mounting screw (screw 10-32 x 1/4")

Sold Individually.

Oven rack

Sold individually.

Screw (screw 8-18 x 7/16")

Oven door seal

This door seal goes around the oven body to help seal in the heat of the oven.

Electronic clock control kit (clock/oven control)

This kit is equipped with the oven control, faceplate and any necessary installation wires. This part may look different from the original, but should still function the same. The wiring is different, and is recommended to be installed by a repair person.

Porcelin wire nuts - 12 (wire connector)

This is a kit of 12.

Screw (screw 8-18 x 1/2")

Control valve

Screw (screw 10-32 x 3/4")

Tube & orifice assembly (tubing 3/8" with orifice fitting (control valve to oven burner))

Screw (screw 6ab x 3/8")