91195975891 Kenmore Range Parts List

Single heating element support clip (broil element support (2))

The support clip is used to hold the broil element in place at the top of the oven cavity. If the clip is broken or damaged, you will need to replace the part. The support clip is made of metal, is a little over an inch long, and is sold individually. This is a genuine OEM part.

Oven sensor (sensor assembly)

The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is a genuine OEM part. If your oven is too hot, not heating evenly, has little to no heat when baking, or is flashing F3/F4 error messages on your control board, you may need to replace it. Make sure to disconnect the power to your range before starting your repair.

Hinge with roller - left side (hinge assembly lt)

This hinge is located on each side of the oven door

Hinge with roller - right side (hinge assembly rt)

This hinge is located on each side of the oven door.

Large haliant burner with limiter - 8" (element 20000w)

This haliant burner element is a gneuine OEM replacement part for your stove. This element is 8 inches in diameter. The element lies underneath the stovetop, and will need to be replaced if it stops heating. To complete this repair you will need a 1/4 inch nut driver and a flat blade screwdriver. To access the element, open the oven door and unscrew the two screws under the lip of the cooktop.

Oven bulb lens cover - glass (oven bulb lens)

This part is the oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover is rigid and protects the light bulb from being damaged. The main reason to replace the light lens cover is if it is cracked, damaged, or missing. Be sure the lens cover is cool to the touch before you begin this repair. To remove the lens cover, simply turn it counter clockwise until you can remove it. Replace it with a new cover and turn it clockwise to lock it into place. This is an OEM part sourced from the manufacturer, and it is sold individually.

Screw (screw st10-16 x 7/16" (50))

Sold Individually.

Screw (screw (8))

Sold Individually.

Haliant burner with limiter - 6" - 1500w (element 1500 w (2))

Ignitor mounting screw (screw tc10-32x.250 hexni)

Sold Individually.

Oven light housing (oven lamp holder)

Must buy bulb locally as per manufacturer.

Broiler pan - large (pan broil (261d656p010))

The broiler pan and insert allows you to cook on a stable surface while allowing the liquid to drain into the pan below making clean up easier. This part is gray in color, made of enameled porcelain for an easy-to-clean, durable and made to last. The pan measures approximately 17” wide by 13” deep, insert measures 15 1/2” wide by 13” deep. This is a genuine OEM part.

Rear drawer glide (slide block-rear (2))

Also called Rear Block.

Convection element (convx element)

Screw (screw (4))

This screw is black in color and sold individually.