68-253640 Parts List

Flat style oven igniter kit (oven igniter kit. Can replace igniters for either bake or broil burners. Replaces shorter and longer igniters in many instances. Amperage range is 3.3)

The flat style gas oven igniter is used to ignite the gas to light the oven burner, which produces heat for your range. If the element has shorted out, is no longer glowing, or is glowing but only orange or red rather than white, then you will need to replace the oven igniter. When replacing the igniter please be very careful not to touch the gray element part of the igniter as it is very fragile. The igniter measures approximately 3-3/4"in length and the amperage range is 3.3 to 3.6. This igniter kit can replace igniters for either the broil or bake burners and can replace shorter and longer igniters. The kit includes the igniter, 4 wire nuts, insulation, 2 wire assembly and a bracket. This is a genuine OEM part. Please make sure to disconnect the power and shut off the gas supply before starting your repair.

Burner head cap with spark electrode (sealed gas burner head assembly, 1 black burner head with spark electrode. Rotate assembly counter clockwise to release burner from the main top. *no)

This black burner head with the spark electrode helps distribute flame evenly to your cookware. If your burner no longer ignites or the burner head is cracked it will need to be replaced. When removing the failed burner head, rotate it counter clockwise to release the burner from your cooktop. Please note the manufacturer has updated the burner head and in the newer version, the gasket seal is no longer required. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Door seal (oven door gasket/seal with retainer clips)

This door seal is fifty-three inches long. It is all black in color and is made of rubber. There are metallic clips sticking out of this seal at various points. These clips help to secure the seal to range doors.

Spark module - surface burners (spark module for surface burners. This spark module provides power to the spark electrode to produce a spark. If it is defective, the burner may not l)

This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Double drip pan (chrome drip pan)

Sold individually.

Oven rack

Sold individually.

Igniter switch (spark ignition switch)

Gas pressure regulator (gas pressure regulator with fittings and mounting bracket)

This valve that automatically cuts off the flow of gas at a certain pressure. There is no liquid propane conversion kit required - just adjust on range. Fittings and mounting bracket are included.

Clock-timer (electronic oven control with user instructions, whi)

Broiler pan

This broil pan is fourteen inches wide, and almost sixteen inches long. It is made of black porcelain.

Broil pan insert (insert, broil pan)

Oven safety valve (gas oven safety valve)

This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.

Burner valve knob (surface burner control knob, white)

Sold Individually. This knob accepts a D-shaped shaft.

Oven thermostat - 6 amp (oven thermostat assembly)

This oven thermostat is intended for use with some of Maytag's brands of electric ovens.

Hinge (door hinge assembly)