68-2558-47 Parts List

Flat style oven igniter kit (oven igniter kit. Can replace igniters for either bake or broil burners. Replaces shorter and longer igniters in many instances. Amperage range is 3.3)

The flat style gas oven igniter is used to ignite the gas to light the oven burner, which produces heat for your range. If the element has shorted out, is no longer glowing, or is glowing but only orange or red rather than white, then you will need to replace the oven igniter. When replacing the igniter please be very careful not to touch the gray element part of the igniter as it is very fragile. The igniter measures approximately 3-3/4"in length and the amperage range is 3.3 to 3.6. This igniter kit can replace igniters for either the broil or bake burners and can replace shorter and longer igniters. The kit includes the igniter, 4 wire nuts, insulation, 2 wire assembly and a bracket. This is a genuine OEM part. Please make sure to disconnect the power and shut off the gas supply before starting your repair.

Burner head cap with spark electrode (sealed gas burner head assembly, 1 black burner head with spark electrode. Rotate assembly counter clockwise to release burner from the main top. *no)

This black burner head with the spark electrode helps distribute flame evenly to your cookware. If your burner no longer ignites or the burner head is cracked it will need to be replaced. When removing the failed burner head, rotate it counter clockwise to release the burner from your cooktop. Please note the manufacturer has updated the burner head and in the newer version, the gasket seal is no longer required. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Door gasket

The oven door gasket prevents heat from escaping the oven cavity when in use by creating a seal around the oven door. If your oven has little or no heat when baking, you may need to replace the gasket. This door gasket contains all the attaching clips needed for installation and is a genuine OEM part. Please make sure the oven is cool before installing the door gasket.

Spark module - surface burners (spark module for surface burners. This spark module provides power to the spark electrode to produce a spark. If it is defective, the burner may not l)

This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Dual outlet oven safety valve (dual oven safety valve)

This gas oven safety valve is used to make sure that no gas is released until the igniter is ready to ignite. This part is for both the bake and broil igniter in your appliance.

Grate burner (burner grates, black (kit of 4))

This square burner grate has sides measuring approximately nine inches. It is all black in color.

Double drip pan (chrome drip pan)

Sold individually.

Door hinge kit (door hinge kit with screws. The hinge on your oven door can be different based on your serial number. Please call us with your model and serial number)

This oven door hinge assembly comes with two screws and is intended for use with many ovens. It can be used on either the left or right hand side.

Igniter switch (spark ignition switch)

Valve knob (surface burner control knob, black)

Sold Individually. This knob accepts a D-shaped shaft.

Clock control kit (clock control kit, black)

Latch kit (oven door latch kit)

Discontinued (valve, burner)

Spark electrode (igniter)

Igniter