Parts for Kenmore Models ADE20N3

Multi rib belt - 92-1/4" (multi rib belt - 92")

This dryer drum belt has four ridges, three grooves, 1/4-inch wide and 92 1/4-inch long. The belt helps rotate the drum. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:: EAP346995

Availability:: In Stock

Price:: $16.00

Lint filter

The lint filter is used to collect lint and debris as it passes through the dryer vent. It is recommended to clean the lint filter before every load. If your dryer takes too long to dry you may need to replace the filter. This lint filter screen has two side guides on either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide. This is a genuine OEM part.

Easy Part #:: EAP11742807

Availability:: In Stock

Price:: $48.87

Door catch kit (strike, door)

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close you may need to replace the door catch. This is a genuine OEM part and includes both the male (strike) and female (catch) pieces. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:: EAP2162263

Availability:: In Stock

Price:: $27.00

High limit kit

This kit comes with three separate thermal fuses and is usually used with clothes dryers that have a fan mounted on the motor shaft. Included within this kit is the high limit (Limit: 258), the gas high limit (Limit: 240), and the gas and electric high limit thermostat (Limit: 300).

Easy Part #:: EAP2162282

Availability:: In Stock

Price:: $30.71

Heating element kit - 240v 4750w (sub la-1044)

This heating element assembly includes the high limit thermostat (L240-80F). The 240-volt 4750-watt, heating element produces heat for drying clothes inside your dryer. If your dryer takes too long to dry or has no heat, you should check for a blown thermal cut out or a thermal fuse. Some heating elements will often have a break in the coil element and will need to be replaced. The element measures approximately 10” L x 3.5” W and the thermostat measures 2” L x 1 1/2” W. Please remember to disconnect the power to the dryer before starting the repair. This is a genuine OEM part.

Easy Part #:: EAP2162280

Availability:: In Stock

Price:: $60.87

Screw, 8/18 x 3/8 (screw)

This screw is sold individually.

Easy Part #:: EAP11746840

Availability:: In Stock

Price:: $7.40

Blower wheel

This genuine OEM white blower wheel has a deep D-shaped shaft receptacle, 7 1/8-inch hub diameter, 8-inch fin diameter, 1/2 -inch diameter motor shaft, 3 1/8-inch deep, 20 standard fins, 3/8-inch motor shaft diameter to flat side of the shaft. The blower wheel attaches to the drive motor shaft and blows the air through the drum and out through the exhaust. The spring clamp is not included with this part. Please be sure to disconnect the power to your dryer before starting your repair.

Easy Part #:: EAP16221211

Availability:: In Stock

Price:: $38.55

Rear drum support roller kit

The rear drum support roller kit includes two drum support rollers, two support shafts, four screws, two spacers, two washers, two retaining rights, and an instruction sheet. If the dryer is making a loud rumbling noise or will not tumble you may need to replace the roller. The drum support roller holds the drum in place while it rotates on the support wheels. Most dryers use two drum rollers, and it is recommended to change both at once. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting the repair.

Easy Part #:: EAP2162268

Availability:: No Longer Available

Screw

This screw is sold individually.

Easy Part #:: EAP11740978

Availability:: In Stock

Price:: $7.15

Blower wheel clamp (sub 312967)

The blower wheel clamp is used to hold the blower wheel to the motor shaft. The clamp is less than an inch long and is used with your dryer. If your blower wheel is loose or making a noise while operating, you may need to replace the clamp. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:: EAP11740752

Availability:: In Stock

Price:: $12.67

Door seal

If this part appears to be too wide for your particular appliance, per the manufacturer, all you have to do is pull it apart.

Easy Part #:: EAP11740719

Availability:: In Stock

Price:: $54.35

Screw (screw, #10 torq limiting)

This screw is sold individually.

Easy Part #:: EAP11742755

Availability:: In Stock

Price:: $12.18

White selector knob (sub 21001239)

This selector knob is white and just over an inch in diameter. Made entirely of plastic, it has a gray indicator dot and is intended for use with both washing machines and some clothes dryers.

Easy Part #:: EAP11738808

Availability:: Special Order

Price:: $36.07

High limit thermostat (limit: 258-80)

This high limit/safety thermostat is used on many gas and electric clothes dryers. It is made of metal, and is almost two inches long. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 258 degrees Fahrenheit. The element will kick back in when the temperature drops to 178 degrees Fahrenheit.