AGS780WW-P1168602W Parts List

Light bulb - 40w (40 watt frosted appliance light bulb.)

This 40-watt light bulb has a standard screw-in base. It is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.

Flat style oven igniter (oven igniter assembly. You must reuse the bracket from original igniter.)

This part is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter, be very careful not to touch the black element part of the igniter as it is very fragile. You will need to reuse the original bracket when installing the new igniter.

Spark electrode (spark ignition electrode with retaining clip)

This part helps your burner ignite and produce flame.

Oven light (oven light bulb receptacle assembly with lens and bulb)

The oven light provides light in the oven cavity. The light assembly is a little over four inches long and has a 660-watt light bulb. If the light is not turning on, the bulb may be burnt out or the socket has failed and will need to be replaced. This is a genuine OEM part.

Hinge kit - right side (door hinge kit, right side)

The oven door hinge assembly attaches to the right side of the door allowing the oven door to open, close, and stay open at an angle. If your oven door is not working properly then you may need to replace the hinge. It is recommended to replace both hinges at the same time. The hinge measures approximately 11 1/2” long, is made of metal, includes a spring and two screws. This is a genuine OEM part.

Spark ignition module with bracket (spark module for surface burners)

This part comes with the mounting bracket.

Hinge kit - left side (door hinge kit for left side. Use pointed screw to cut threads in new hinge holes.)

The oven door hinge kit attaches to the left side of the door to help control the opening and closing of the oven door. The door hinge also allows the oven door to stay open. The door hinge kit includes the left side hinge, screws and the spring. This hinge measures approximately 11 1/2” long and is made of metal. The manufacturer suggests using the pointed screw to cut threads in the new hinge holes.

Clip, electrode * (electrode clip)

This clip is well under an inch in diameter. It is made of metal and it will help secure a range's electrode.

Dual gas valve (valve- gas)

Once this valve senses the desired heat, this part will open up and allow the gas to travel to the oven burner.

Gas valve burner orifice - #58 lpg (burner orifice, #58 lpg)

Oven burne

Latch arm

Temperature sensor (oven sensor)

This temperature sensor detects the temperature within the oven cavity.

Discontinued

Orifice- # (orifice, #52 natural)