Parts for Kenmore Models ALG643RAW-PALG643

M series new style coil kit ('m' series ignition coil kit)

This gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If there is no heat or your drying time is getting longer, the coils may be bad and will need to be replaced. Once the coils go bad they do not hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:: EAP334310

Availability:: In Stock - Ships Today

Price:: $29.07

Drum support roller (dryer drum support roller)

This single drum support roller is used for square-ported model clothes dryers. It has a metallic bearing in its center. This support roller is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. If your dryer is noisy, will not tumble, or takes too long to dry, you might need to replace the roller. It is recommended that you replace both rollers at once. It is sold individually.

Easy Part #:: EAP11741913

Availability:: In Stock - Ships Today

Price:: $19.72

Multi rib belt (dryer drum belt)

This dryer drum belt has five ridges, 93-3/8 inches in length, and 3/8 of an inch wide. It is flat, black in color, and is made entirely of rubber. The belt helps rotate the drum. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:: EAP11742271

Availability:: In Stock - Ships Today

Price:: $11.62

Drum glide (dryer drum glide bearing)

The drum glide helps the front drum rotate smoothly and quietly while operating. If your dryer will not tumble or is noisy, the glide could be worn down, causing metal on metal noise. In this case, it will need to be replaced. It is recommended to replace both glides at the same time and two are required for the dryer. The drum glide is a genuine OEM part and is sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:: EAP11741931

Availability:: In Stock - Ships Today

Price:: $13.34

Thrust washer (laundry appliance washer)

This part is located between the drum support rollers and idler pulley in your dryer to help prevent the parts from bumping up against the brackets they are attached to. If your dryer has a burning smell, is noisy, or will not tumble, you may need to replace the thrust washer. The washer is 3/4 inches in diameter and a is genuine OEM part. It is recommended to disconnect the power to your dryer before you start your repair.

Easy Part #:: EAP11740482

Availability:: In Stock - Ships Today

Price:: $7.49

Lint filter (dryer lint screen)

Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.

Easy Part #:: EAP11741919

Availability:: In Stock - Ships Today

Price:: $69.08

Idler pulley wheel with bearing (dryer idler pulley)

This two-inch-wide idler pulley wheel is black in color and is made of plastic. This pulley wheel comes with its own metallic bearing in its center. This part helps maintains the correct tension on the drive belt to rotate the drum. The drum will not spin if the idler pulley fails to put the correct amount of tension on the belt. It is recommended to disconnect the power to your dryer before you start your repair.

Easy Part #:: EAP11757553

Availability:: In Stock - Ships Today

Price:: $18.60

Dryer radiant flame sensor (dryer radiant sensor)

This part senses if the igniter is hot enough to ignite the flame for heat, allowing the gas valve to open. The sensor is three inches long and is used for many gas clothes dryers. If your dryer is not creating any heat, taking too long to dry or shuts off too soon, you may need to replace the flame sensor. This is a genuine OEM part and is made of both plastic and metal. Please remember to disconnect power to your dryer before starting your repair.

Easy Part #:: EAP11741429

Availability:: In Stock - Ships Today

Price:: $42.18

Door catch kit (dryer door catch)

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close you may need to replace the door catch. This is a genuine OEM part and includes both the male (strike) and female (catch) pieces. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:: EAP2162263

Availability:: In Stock - Ships Today

Price:: $27.00

Single drum glide felt pad (dryer drum front glide bearing pad)

This dryer drum glide pad is an inch long. It is made of a felt material and is used for gas and electric clothes dryers.

Easy Part #:: EAP11742773

Availability:: In Stock - Ships Today

Price:: $6.43

Retaining ring (laundry appliance retaining ring)

The retaining clip goes onto the end of the roller axle and holds the rear wheel onto the axle. If the ring is broken, damaged, making noises, or will not tumble, you will need to replace it. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP11740487

Availability:: In Stock - Ships Today

Price:: $12.79

Cylinder felt seal (dryer drum rear seal)

The felt seal keeps the hot air in the dryer drum. It is located between the back of the drum and the rear dryer panel. If your dryer is noisy, or the seal is damaged, you will need to replace it. This is the seal only; the high temperature adhesive is not included. This is a genuine OEM part. Please make sure you disconnect the power to the dryer before starting your repair.

Easy Part #:: EAP11741917

Availability:: In Stock - Ships Today

Price:: $35.47

Door switch kit (dryer door switch)

This part replaces older two terminal switches.

Easy Part #:: EAP1964648

Availability:: In Stock - Ships Today

Price:: $13.79

Cylinder glide bracket (dryer drum glide bracket)

These brackets support each side of the tub. Order quantity needed.

Easy Part #:: EAP11741912

Availability:: In Stock - Ships Today

Price:: $57.14

Motor assembly - threaded shaft (dryer drive motor)

This 1/4 horsepower gas or electric clothes dryer motor carries 120 volts, 60 Hz, and 5.5 amps. It also performs 1725 revolutions per minute. This motor is used for some gas and some electric clothes dryers.