ALG866SAC-PALG866SAC Parts List

Search the entire ALG866SAC-PALG866SAC by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 7 8
1-15 of 106

Drum support roller (dryer drum support roller. The rollers tend to wear at the same rate so both should be replaced while the dryer is apart.)

This single drum support roller is used for square-ported model clothes dryers. It has a metallic bearing in its center. This support roller is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. If your dryer is noisy, will not tumble, or takes too long to dry, you might need to replace the roller. It is recommended that you replace both rollers at once. It is sold individually.

Easy Part #:
EAP11741913
Availability:
In Stock
Price:
$19.49

Multi rib belt (dryer drum drive belt. Length 93 3/8”, width 3/8”, characteristics, 5 ridges, flat.)

This dryer drum belt has five ridges, 93-3/8 inches in length, and 3/8 of an inch wide. It is flat, black in color, and is made entirely of rubber. The belt helps rotate the drum. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:
EAP11742271
Availability:
In Stock
Price:
$11.49

Drum glide (dryer drum glide pad. Drum glides help to support the front of the dryer drum as it rotates. If the drum glides are worn out, the dryer will be noisy.)

The drum glide helps the front drum rotate smoothly and quietly while operating. If your dryer will not tumble or is noisy, the glide could be worn down, causing metal on metal noise. In this case, it will need to be replaced. It is recommended to replace both glides at the same time and two are required for the dryer. The drum glide is a genuine OEM part and is sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:
EAP11741931
Availability:
In Stock
Price:
$13.19

Thrust washer (washer. Has a 3/4-inch outside diameter.)

This part is located between the drum support rollers and idler pulley in your dryer to help prevent the parts from bumping up against the brackets they are attached to. If your dryer has a burning smell, is noisy, or will not tumble, you may need to replace the thrust washer. The washer is 3/4 inches in diameter and a is genuine OEM part. It is recommended to disconnect the power to your dryer before you start your repair.

Easy Part #:
EAP11740482
Availability:
In Stock
Price:
$7.40

Lint filter (dryer lint filter in white. The part no longer comes with felt seal.)

Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.

Easy Part #:
EAP11741919
Availability:
In Stock
Price:
$68.29

Idler pulley wheel with bearing (idler pulley wheel and bearing assembly. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tensio)

This two-inch-wide idler pulley wheel is black in color and is made of plastic. This pulley wheel comes with its own metallic bearing in its center. This part helps maintains the correct tension on the drive belt to rotate the drum. The drum will not spin if the idler pulley fails to put the correct amount of tension on the belt. It is recommended to disconnect the power to your dryer before you start your repair.

Easy Part #:
EAP11757553
Availability:
In Stock
Price:
$18.60

Dryer radiant flame sensor (gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly.)

This part senses if the igniter is hot enough to ignite the flame for heat, allowing the gas valve to open. The sensor is three inches long and is used for many gas clothes dryers. If your dryer is not creating any heat, taking too long to dry or shuts off too soon, you may need to replace the flame sensor. This is a genuine OEM part and is made of both plastic and metal. Please remember to disconnect power to your dryer before starting your repair.

Easy Part #:
EAP11741429
Availability:
In Stock
Price:
$41.69

Door catch kit (door catch kit, includes catch and clip (metal))

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close you may need to replace the door catch. This is a genuine OEM part and includes both the male (strike) and female (catch) pieces. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:
EAP2162263
Availability:
In Stock
Price:
$27.00

Retaining ring (retainer snap ring)

The retaining clip goes onto the end of the roller axle and holds the rear wheel onto the axle. If the ring is broken, damaged, making noises, or will not tumble, you will need to replace it. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP11740487
Availability:
In Stock
Price:
$12.64

Cylinder felt seal

The felt seal keeps the hot air in the dryer drum. It is located between the back of the drum and the rear dryer panel. If your dryer is noisy, or the seal is damaged, you will need to replace it. This is the seal only; the high temperature adhesive is not included. This is a genuine OEM part. Please make sure you disconnect the power to the dryer before starting your repair.

Easy Part #:
EAP11741917
Availability:
In Stock
Price:
$35.06

Door switch kit (three terminal door switch kit. Be aware that this switch replaces older 2 terminal switches.)

This part replaces older two terminal switches.

Easy Part #:
EAP1964648
Availability:
In Stock
Price:
$13.63

Cylinder glide bracket (bracket, cylinder glide)

These brackets support each side of the tub. Order quantity needed.

Easy Part #:
EAP11741912
Availability:
In Stock
Price:
$56.49

Motor assembly - threaded shaft (dryer drum drive motor assembly with pulley. The pulley is not available separately from the motor assembly.)

This 1/4 horsepower gas or electric clothes dryer motor carries 120 volts, 60 Hz, and 5.5 amps. It also performs 1725 revolutions per minute. This motor is used for some gas and some electric clothes dryers.

Easy Part #:
EAP11739459
Availability:
In Stock
Price:
$111.14

Drum support roller and shaft assembly (drum support roller axle. *roller will be tight on new shaft. Gently tap roller onto new shaft with a hammer.)

This drum support roller bracket and shaft assembly is a little over two inches long. It is made of metal.

Easy Part #:
EAP11742273
Availability:
In Stock
Price:
$49.13

Lint duct assembly (upper & lower air duct assembly with lint screen)

This part includes the upper and lower air duct assembly and lint screen.

Easy Part #:
EAP2039494
Availability:
No Longer Available
< PREV 1 2 3 4 5 6 7 8
1-15 of 106