DDG9680RAL GE Dryer Parts List

Search the entire DDG9680RAL by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 ... 10
1-15 of 136

D-shaped knob clip (metal insert for dryer control knob.)

This control knob clip helps secure the timer knob to the shaft allowing you to select the desired setting for your dryer. If the knob has become loose or the clip is missing you will need to replace the clip. This clip is a genuine OEM part, made of metal and is sold individually.

Easy Part #:
EAP268493
Availability:
No Longer Available

Rear drum bearing kit (drum rear bearing and post kit, with hardware)

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Over time the drum bearing will wear out, once it has the dryer may make some noise and the drum bearing will need to be replaced. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power to your appliance before starting your repair.

Easy Part #:
EAP267529
Availability:
In Stock - Ships Today
Price:
$62.96

Light bulb

This 10W - 120V light bulb is used on the inside of your dryer to provide light when the door is open. It is clear in color and has a standard screw-in base. If your current bulb is burnt out or broken you will need to replace it. This bulb is a genuine OEM part and is sold individually.

Easy Part #:
EAP10063224
Availability:
In Stock - Ships Today
Price:
$13.49

Drive belt (dryer drive belt. This is the most common GE/Hotpoint dryer belt. 87" long and 1/4" wide. 4 ridges.The drive belt dries out over time.)

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

Easy Part #:
EAP2350043
Availability:
In Stock - Ships Today
Price:
$25.19

Idler pulley wheel (dryer idler pulley wheel. If the pulley wheel is worn down, it may cause the dryer to be excessively noisy.)

The idler pulley helps maintain the proper amount of tension on the drive belt to turn the drum. The idler pulley is located between the motor pulley and drum to provide tension on the belt. If the part has become worn, it could cause the dryer to be noisy or squeaky, and the pulley will need to be replaced. This part is yellow in color, made of plastic, and measures approximately 2 1/2” in diameter. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting the repair.

Easy Part #:
EAP265721
Availability:
In Stock - Ships Today
Price:
$28.58

Lint filter with frame (dryer lint filter. This filter should be cleaned before every load to ensure proper airflow. If the lint filter is torn or damaged, replace it.)

The lint filter and frame for your dryer traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint filter is cracked or clogged, or the dryer takes too long to dry or if excessive lint is accumulating inside the dryer or its venting, you may need to replace the lint filter. To replace the filter, simply remove the old, damaged filter, and replace it with the new one. This part is approximately 13 inches by 3 inches.

Easy Part #:
EAP266250
Availability:
No Longer Available

M series ignition coil kit (dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils ma)

The gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If it takes too long to dry or there is no heat, the coils may be bad and will need to be replaced. When the coils go bad they will not hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:
EAP470049
Availability:
In Stock - Ships Today
Price:
$19.96

Door latch (dryer door catch kit)

This part helps to keep the door closed while the machine is running.

Easy Part #:
EAP3502777
Availability:
In Stock - Ships Today
Price:
$14.53

Rear drum bearing (rear dryer drum bearing. Be sure to enter your model number to ensure that you have the right bearing for your model.)

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.

Easy Part #:
EAP267865
Availability:
In Stock - Ships Today
Price:
$17.17

Front drum slide kit (front drum supports/glides (2), with hardware)

This front drum slide kit comes with two slides with the apppropriate mounting hardware.

Easy Part #:
EAP267600
Availability:
No Longer Available

Gas igniter (gas dryer igniter, round style. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the dryer will not heat.)

Be very careful to not handle the igniter by its gray part. Hold it by its white tip only.

Easy Part #:
EAP268028
Availability:
In Stock - Ships Today
Price:
$35.69

Adjustable leveling screw (leveling leg, adjustable)

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able to create a level base for your dryer. The leveling screw has a hexagon-shaped gray plastic foot, with a screw that is approximately 1 inch in length. To replace a damaged screw, simply turn the old screw to the left, until it can be removed. Then, simply screw the new leveling screw into place on the bottom of the dryer, making sure it is the same height as the other 3 leveling screws.

Easy Part #:
EAP1021358
Availability:
In Stock - Ships Today
Price:
$13.36

Screw

This screw is sold individually.

Easy Part #:
EAP271689
Availability:
In Stock - Ships Today
Price:
$11.37

Natural gas to liquid propane conversion kit (two-coil gas valve conversion kit. This kit converts a dryer from running on natural gas to liquid propane. Instructions are included.)

This conversion kit changes the dryer from natural gas to liquid propane. Installation instructions are included.

Easy Part #:
EAP267591
Availability:
In Stock - Ships Today
Price:
$65.79

Drive motor

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

Easy Part #:
EAP1559768
Availability:
In Stock - Ships Today
Price:
$289.51
< PREV 1 2 3 4 5 6 ... 10
1-15 of 136