Parts for Kenmore Models DGCI

Rear drum bearing kit (use 5303281153)

This rear drum bearing kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws. The support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time the drum bearing will wear out. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:: EAP459829

Availability:: In Stock - Ships Today

Price:: $52.07

Drum belt (use 134163400)

This dryer drum belt is 88 3/4 inches long, and is 1/4 inch wide. The belt attaches to the motor pulley and helps rotate the drum as the motor rotates. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:: EAP1148434

Availability:: In Stock - Ships Today

Price:: $16.26

Upper drum glide (use 5303937139)

The upper drum felt glide kit helps to support the front drum as it rotates smoothly and quietly while operating. This kit includes three glides with the adhesive. If your dryer won’t tumble or is noisy, the glide could be worn down causing you to hear a metal on metal noise and will need to be replaced. The drum glide is a genuine OEM part and sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:: EAP470317

Availability:: In Stock - Ships Today

Price:: $32.37

Drum support bearing (use 131825900)

The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:: EAP418807

Availability:: In Stock - Ships Today

Price:: $5.73

Door catch (use 131658800)

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close, you may need to replace the door catch. This is a genuine OEM part. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:: EAP418433

Availability:: In Stock - Ships Today

Price:: $50.63

M series ignition coil kit (use 5303931775)

The gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If it takes too long to dry or there is no heat, the coils may be bad and will need to be replaced. When the coils go bad they will not hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:: EAP470049

Availability:: In Stock - Ships Today

Price:: $19.96

Lint screen and frame (use 131390300)

This filter collects lint as it passes through the dryer vent.

Easy Part #:: EAP417677

Availability:: No Longer Available

Flat style belt (use 5303281154)

This is a flat style ridgeless dryer belt.

Easy Part #:: EAP459830

Availability:: In Stock - Ships Today

Price:: $10.26

Idler pulley assembly (use 5303212849)

The idler pulley assembly provides the tension required for a flat belt. It also serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel. If your dryer is noisy or will not tumble you may need to replace the idler pulley. This is a genuine OEM part.

Easy Part #:: EAP457526

Availability:: No Longer Available

Dryer drum bearing bracket (use 131724300)

This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing

Easy Part #:: EAP12579101

Availability:: In Stock - Ships Today

Price:: $9.90

Main terminal block kit (block, terminal)

This terminal block kit (also called terminal boards or strips) provides a convenient means of connecting individual electrical wires. This kit includes mounting screws and hex nuts and can be used with dryers and ranges. This kit allows you to attach the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to operate properly. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:: EAP471605

Availability:: In Stock - Ships Today

Price:: $8.72

Door latch kit (latch & strike)

This door latch kit comes with the strike and the catch.

Easy Part #:: EAP475419

Availability:: In Stock - Ships Today

Price:: $41.05

Flame sensor (use 5303281135)

This part senses the flame for heat allowing the gas valve to open.

Easy Part #:: EAP459818

Availability:: In Stock - Ships Today

Price:: $26.58

Door strike (use 5303207102)

The door strike works in conjunction with the dryer door. The male piece of the door strike is the piece that activates the door switch once the dryer door is closed. If your dryer won’t start, or the door won’t open/close, you may need to replace the door strike. This part is made from metal and measures approximately 1 inch. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.