DPSB620GCW GE Dryer Parts List

Igniter (gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally)

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only.

Adjustable leveling screw (leveling leg, adjustable)

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able to create a level base for your dryer. The leveling screw has a hexagon-shaped gray plastic foot, with a screw that is approximately 1 inch in length. To replace a damaged screw, simply turn the old screw to the left, until it can be removed. Then, simply screw the new leveling screw into place on the bottom of the dryer, making sure it is the same height as the other 3 leveling screws.

M - series secondary coil - 2 terminals (dryer gas valve solenoid coil. Has two terminals.)

This part is the replacement main valve coil for your dryer. It is black and white in color and has 2 terminals. It is approximately 1 inch long and 1 inch wide. The main valve coil opens the gas valves while the dryer is running. This coil is used with two coil gas shut off valve assemblies. Be sure to turn off the gas before you begin this repair. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Door strike (dryer door strike.)

TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not only will this cause the door to swing open, but it won’t allow the dryer to start properly. It is a small piece of metal, about 1 inch in length and is sold individually.

Nut (cap nut)

Dryer door handle (door handle)

Almond in color.

Natural gas to liquid propane conversion kit (two-coil gas valve conversion kit. This kit converts a dryer from running on natural gas to liquid propane. Instructions are included.)

This conversion kit changes the dryer from natural gas to liquid propane. Installation instructions are included.

Drive motor

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

Blower wheel (blower wheel for dryer)

This wheel attaches to the motor.

Screw

Heat detector (flame sensor assembly for gas dryer)

Also known as Flame Sensor/Detector.

High limit thermostat - l290-40f (thermostat, high limit)

This hi-limit thermostat acts as as safety mechanism that keeps the dryer from overheating.

Door gasket

Screw

This screw is sold individually. Size: 10-16x1/2

Liquid propane to natural gas conversion kit (dryer gas valve conversion kit from lp (liquid propane) to natural gas)

This conversion kit changes the dryer from liquid propane to natural gas. Installation instructions are included.