DV42H5600EF Samsung Dryer Parts List

Screw (screw 8 x 1/2)

This screw is half an inch long. It is made of metal and is intended for use with ranges, refrigerators, and washing machines.

Drive belt (dryer drum drive belt. This slender belt wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley.)

Idler pulley assembly (idler pulley and bracket for dryer drum belt)

Drum support roller & axle (dryer drum roller assembly. Includes the roller shaft and mounting clips. As the bearing in the roller wears, it self-lubricates so no grease is neede)

Sold individually.

Thermistor (dryer thermistor. If the dryer displays a fault code the thermistor may be defective.)

Drum assembly (dryer drum wrapper assembly)

Thermal fuse (dryer thermal fuse on heater housing (non-resettable). The original thermo-protector is riveted to the mounting bracket.)

Thermal fuse (dryer thermal fuse (also called the thermal limit). Located on the blower housing. The thermal fuse blows to cut off power to the dryer if the dryer o)

Dryer leveling leg (leveling leg)

Leveling leg supports the dryer. Adjust the height of the leveling leg to make the dryer level.

Moisture sensor (dryer moisture sensor. The moisture sensor monitors the clothing’s moisture level and sends a signal to the control board when the clothes are dry.)

Assembly bracket thermostat (thermal fuse with bracket, located on the element housing. The fuse is not resettable and will need to be replaced if blown. If the dryer does not hea)

Case-filter;grace-dryer, (filter case)

High limit thermostat (dryer high-limit thermostat, l260-50f. If the dryer overheats, the high-limit thermostat cuts off power to the dryer. If the dryer won't heat, the hig)

This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. The element will kick back in when the temperature drops to 210 degrees Fahrenheit - the differential of 50 degrees.

Assembly die rack dry;grace- (drying rack)

Screw-tapping;th,+,1,m4, (tapping screw)