FPCI18TM3 Frigidaire Refrigerator Parts List

Defrost timer - 60hz 120v (refrigerator defrost timer, 60 hertz, 120 volts. Turn the dial on the timer clockwise to advance it into and out of defrost.)

This 60Hz 120V defrost timer will cycle for thirty minutes after every eight hours of run time. You can turn the dial on the defrost timer clockwise to be able to advance it in and out of defrost mode. The defrost timer helps melt away any ice that may have built up on the evaporator coils. If your refrigerator/freezer is too warm or too cold, will not advance into the defrost cycle, freezer will not defrost, or it runs too long, the defrost timer may be defective and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Defrost thermostat (refrigerator defrost thermostat kit. L55-20f. The defrost thermostat monitors the temperature of the evaporator coils.)

The defrost thermostat snaps onto the top portion of the evaporator. It acts as a safety device and protects the evaporator from overheating during the defrost cycle. The thermostat can sense the rise in the evaporator temperature during the defrost cycle and cycles the defrost heater off after all the frost is melted from the coils. This limiter thermostat will cut out when the temperature inside your refrigerator reaches 55 degrees Fahrenheit and kicks back in when the internal temperature drops to 20 degrees Fahrenheit. The defrost thermostat may need to be replaced if the appliance is experiencing temperature-related issues. This is a genuine OEM part. It is recommended to disconnect the power to your appliance before starting your repair.

Door rack - cut-to-fit (door shelf bar - customer cut to fit)

This rack may be longer than what is needed. You will need to cut this rack to make it fit your appliance.

Door shelf end cap - left side (door shelf retainer bracket for the left side)

This white door shelf end cap is used for left side of some refrigerator door shelves.

Fresh food door gasket (refrigerator door gasket {30 1/2"-44"} almond)

This white fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Evaporator fan blade (evaporator/freezer fan blade)

If your refrigerator or freezer is too warm or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.

Evaporator fan motor kit (refrigerator evaporator fan motor kit. The evaporator fan motor draws air over the evaporator coils and circulates cool air throughout the refrigerato)

The evaporator fan motor is in the back of the freezer section and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which then circulates the cold air from the freezer section to the fresh food section. It is suggested to replace the thermistor when replacing the evaporator fan. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Door shelf end cap - right side (refrigerator or freezer door shelf retainer bracket, right hand.)

Note: As per manufacture this end cap is the right side.

Door shelf end cap - left side (door shelf retainer bar support cap, left hand)

This white door shelf end cap is used for left side of some refrigerator door shelves. Note: As per the manufacture this end cap is for the left side.

Ice cube tray (universal ice cube tray, plastic)

Sold individually.

Door shelf bar - white - cut to fit (shelf retainer bar, cut to fit)

Sold individually.

Freezer door gasket (freezer door gasket {16 3/4"-31"})

This almond door gasket is used to seal the freezer door when closed.

Defrost heater with straps (defrost heater assembly)

The defrost heater keeps the cooling coils from frosting over.

Defrost drain pan kit (defrost drain pan kit, mounts on top of compressor)

This kit includes the drain pan, thermal mastic, sound dampening pad and 2 retainer wires. This part mounts to the top of the compressor.

Glide n' guard