GR-L258SSJ Parts List

Crisper drawer front (refrigerator drawer cover assembly. The cover has the optibin crisper and humidity control with clear plastic window.)

This is used on the Opti-bin crisper drawer and it includes the humidity control and a clear plastic window.

Plastic tube - 5/16 inch (plastic tube, 5/16")

The 5/16” plastic water tubing attaches to the water inlet valve and goes into the refrigerator. The tubing supplies water to the water dispenser and the ice maker. If the tubing becomes damaged or cracked, it can cause water to leak out onto the floor and the water tubing will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power and water supply before starting the repair.

Drawer slide rail (refrigerator drawer rail guide assembly. Can be used on right-hand or left-hand side of drawer.)

Sold individually.

Ice maker assembly (refrigerator icemaker assembly. If the icemaker is not making ice, make sure the freezer is cold enough to cycle the icemaker (zero degrees fahrenheit)

The wire harness is NOT available separately. Refrigerator ice maker kit AEQ36756901 is an original equipment manufacturer (OEM) part that fits some refrigerators in these series: Kenmore 795; Kenmore Elite 795; and LG LFX, LMX and LSC. Ice maker AEQ36756901 receives water from the water inlet, holds the water in the ice mold until the water freezes solid and then automatically ejects the ice and refills to continue the process until the ice storage in is full. This ice maker kit contains the complete ice maker, housing and control device.

Primary water valve - single coil (refrigerator water inlet valve assembly. If the icemaker or water dispenser does not work then the valve may be restricted and need replacement.)

Lamp cover (lightbulb lens cover, clear plastic.)

This lamp cover is also commonly referred to as a light lens. This is a genuine replacement part. It is used in a refrigerator to cover the light bulb. It is made of clear plastic. It measures 14 inches by 5 1/2 inches. This does not include the white plastic housing that the light is in, this is just the cover. To install your replacement part you simply snap it into place, no tools are required.

Push button switch (switch,[push])

This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is released, and the light comes on. When you close the door the switch is pressed in, and the light turns off. You may need a putty knife to remove your old switch.

Vegetable tray (tray assembly,vegetable)

This is a clear bin with a white front.

Door gasket - black (refrigerator door gasket)

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Door gasket - black (refrigerator door gasket)

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Case,lamp (light assembly housing cover. Located in top of refrigerator compartment.)

Meat tray (meat tray assembly)

Ice chute door - heated (ice chute door)

Light bulb (incandescent light)

Guide,drawer (drawer guide)