HSS25GFTC Refrigerator Parts List

Refrigerator ice and water filter (refrigerator water filter)

Drawer slide rail - right side (refrigerator drawer slide rail)

This replacement drawer slide rail is for the right-hand side of your refrigerator. This part attaches to the inside wall of your refrigerator to support the sliding crisper drawer. If the rail is broken or the drawer is not sliding properly, you will need to replace the slide rail. You will need a Phillips screwdriver to complete this repair.

Ice maker (refrigerator icemaker kit, the kit includes the fill cup, 4 pin wire harness adapter, and tube.)

This ice maker assembly is used to make ice in your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold into the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. This kit includes the fill cup, 4-pin wire harness adapter, and a tube. Disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Water valve with guard (refrigerator water inlet valve assembly)

This double inlet water valve has quick connections. This valve has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.

Drawer slide rail - left side (refrigerator crisper drawer slide rail)

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. This part includes the rail only.

Temperature sensor (refrigerator temperature sensor)

The temperature sensor, also known as a thermistor, helps detect the temperature inside the refrigerator and sends the information to the control board. If your refrigerator is too warm or not cooling properly, you may need to replace the temperature sensor. This is a genuine OEM part. Please make sure to disconnect the power to the refrigerator before starting your repair.

Main control board assembly (refrigerator electronic control board)

This board controls the operation of the unit and is located on the back of the refrigerator. The defrost controls are built-in to the control board. If your refrigerator is too hot or cold, will not defrost, runs to long, or the ice maker will not work, you may need to replace the control board. Note: This is a genuine OEM part and has been updated by the manufacturer. It may differ in appearance but will function the same as the original.

Defrost thermostat (high limit thermostat for refrigerator or freezer defrost heater, l140-30f. This thermostat is normally closed for continuity at room temperature.)

This defrost thermostat acts as a safety device against over heating in case of mechanical failure.

Vegetable drawer - clear (refrigerator crisper drawer)

Sold individually. This is used in refrigerator to store vegetable and fruits at an optimal temperature

Dispenser door solenoid assembly (refrigerator dispenser ice chute door solenoid)

This part is a possible option when ice door won't open or shut properly or when water is not dispensing.

Dispenser door assembly or flapper (refrigerator dispenser ice chute door kit)

The ice chute door opens to dispense ice once activated. This part mounts in the ice dispenser. If it is too warm inside your refrigerator, there is frost build up, or your icemaker will not make or dispense ice, you may need to replace the ice chute door. The crank no longer comes with this part, but you can use the original crank. The crank is sold separately depending on the model number of your appliance. The ice chute door is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Defrost heater and bracket assembly (refrigerator defrost heater)

The defrost heater keeps the cooling coils from frosting over. The heater will get hot and melt any ice or frost build up around the coils.

Bucket auger (refrigerator dispenser auger)

The ice bucket auger is located within the ice bucket assembly in your freezer. It stirs and dispenses the ice in the bucket. You may need to replace the auger if your ice maker is noisy, or not dispensing ice. Disassembly of the ice bucket assembly is necessary to replace this part. Turn off power to the appliance before removing the ice bucket assembly to do this repair.

Refrigerator ice bucket and auger assembly (refrigerator ice container assembly)

Drawer slide rail - right side (refrigerator drawer slide rail)

This is the drawer slide rail or slide assembly for your refrigerator. You will find the drawer slide rail at the bottom of your refrigerator, mounted to the right-hand side of the cabinet wall. It is designed to hold the bottom shelf in place. You will want to make sure you are replacing the bottom rail, as the top one is a longer rail. The slide rail is held in place with two Phillips screws and is made of white plastic.