Parts for Kenmore Models JBP56G

Bake element - 220v 2300w (oven bake heating element with screw-on terminals. The element is 18-1/4 inches wide, 14-1/2 inches deep to mounting flange. Terminal ends extend 2-1/)

This closed-hinged style bottom bake element is located on the bottom of the oven cavity to supply the heat for baking. This bake element has screw-on wire terminals is 18 1/4-inch wide and 14 1/2-inch deep to mounting flange and the terminal ends extend 2 1/2-inch past the flange. The element is 2300 watts and 20 volts. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. This is a genuine OEM bake element. Please remember to disconnect the power to your oven before you start your repair.

Easy Part #:: EAP249466

Availability:: In Stock

Price:: $49.14

Surface burner terminal block kit (clip receptacle)

Also known as receptacle.

Easy Part #:: EAP242972

Availability:: In Stock

Price:: $29.41

Infinite heat switch kit (sw.Inf. Control 6" brnr)

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

Easy Part #:: EAP16216966

Availability:: In Stock

Price:: $47.77

Drip bowl - 6 inch (burner bowl 6")

This 6 inch chrome drip bowl is intended for use with solid terminal plug-in style surface burner units on electric ranges.

Easy Part #:: EAP244800

Availability:: In Stock

Price:: $9.40

Broil element (broil unit 208/240v)

The broil element is located on the roof of the oven cavity to supply heat for broiling. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. The mounting bracket is not included with the element. If the element is no longer heating or it has shorted out, then you will need to replace your broil element. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:: EAP249411

Availability:: In Stock

Price:: $27.49

Surface element - 8 inch - 2350w (8" p.I. S/u alum)

The 8” coil surface burner element is used to supply heat to the top of the range for cooking. This element carries 2350 watts, and due to an update by the manufacturer is now a 5-turn element. If the element is not providing heat, the switch or element might have gone bad and will need to be replaced. You can use a multimeter to test for continuity to see which part is defective. Please make sure the element is cool before replacing it. This is a genuine OEM surface burner element. Disconnect the power to the range or cooktop before starting the repair.

Easy Part #:: EAP243868

Availability:: In Stock

Price:: $53.79

Surface element - 6 inch - 240v (6" p.I. S/u alum)

This Y-frame 6-inch surface element is a genuine OEM part. It has five turns, a metallic center medallion and carries 240 volts. If your element is not heating, you may need to replace it. Please be sure to disconnect the power to your range before starting your repair.

Easy Part #:: EAP243867

Availability:: In Stock

Price:: $47.76

Oven sensor (sensor)

The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is a genuine OEM part. If your oven is too hot, not heating evenly, has little to no heat when baking, or is flashing F3/F4 error messages on your control board, you may need to replace it. Make sure to disconnect the power to your range before starting your repair.

Easy Part #:: EAP236043

Availability:: In Stock

Price:: $122.56

Drip bowl - 8 inch (burner bowl 8")

This 8 inch chrome drip bowl is intended for use with solid terminal plug-in style surface burner units on electric ranges.

Easy Part #:: EAP244801

Availability:: In Stock

Price:: $11.53

Light bulb - 40w (bulb-oven light)

This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.

Easy Part #:: EAP217532

Availability:: In Stock

Price:: $8.65

Door handle end cap (end cap handle)

This end cap can be used for either the left or right side.

Easy Part #:: EAP256619

Availability:: In Stock

Price:: $17.74

Terminal block (receptable kit (terminal block) for top surface element on electric range.)

This kit includes one ceramic block with 6" wire leads, 2 wire nuts and 2 heat shrink with mounting bracket.

Easy Part #:: EAP232646

Availability:: In Stock

Price:: $34.62

Burner bowl - 8 inch (bowl burner 8" - gray)

This burner bowl or drip pan is found beneath the heating element on your cooktop or range. This part measures 8 inches in diameter, and should not be confused with the smaller pan, which measures 6 inches in diameter. The burner bowl collects spills that may build up when cooking on your range. If your old 8-inch burner bowl is cracked, broken, or missing, this is the part that can replace it.

Easy Part #:: EAP244397

Availability:: In Stock

Price:: $27.43

Drip bowl - 6 inch (bowl burner 6" - gray)

This gray drip bowl is sold individually.

Easy Part #:: EAP244396

Availability:: In Stock

Price:: $27.83

Light cover (lamp cover assembly)

The oven bulb lens cover is made of glass and is approximately 2.75 inches in diameter. The lens cover protects the light bulb from being damaged. If the lens is cracked, damaged, or missing it will need to be replaced. It is suggested to make sure that the lens cover is cool to the touch before you start this repair. To remove the bulb lens cover simply slide the retaining clip off and then remove the lens. Replace it with a new cover and slide the retaining clip back on to hold it into place. This is an OEM part sourced from the manufacturer.