JBP73WLW GE Range Parts List

Bake element - push on terminals - 240v (oven bake element. It is not unusual for a bake element to short out and arc in one spot. If this occurs, disconnect the power to the stove until the)

The bake element provides heat for baking and is located on the bottom of the oven. This part measures approximately 20-inch in length, 18-inch wide and is made of metal. If your bake element has shorted out, has arcing, makes the oven too hot, is not heating properly or has little to no heat, you may need to replace it. You can use a multi meter to test the bake element for electrical continuity to see if you need to replace it. Please remember to disconnect the power before starting your repair. This is a genuine OEM bake element.

Temperature sensor (oven sensor)

The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. The sensor is usually located in the back of the oven. This is a genuine OEM part. Please make sure to disconnect the power to your range before starting your repair.

Broil element (oven broiler heating element. If the oven does not broil, the broil element may be burned out.)

This broil element is found on the upper part of the oven cavity.

Light bulb - 40w (40 watt clear appliance bulb)

This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.

Dual radiant element - 9 inch (large radiant surface burner with sensor, 2500w. If the surface element is not heating, use a multimeter to test the element for continuity.)

This is a large dual haliant element with a limiter or sensor for glass cooktops and freestanding ranges. It is a 2500-watt part. The inner diameter measures 9 inches, while the outer diameter measures 10 inches. If there is no heat generated from your element, you may need to replace this part. You may also need to check your socket or infinite switch. It is located under the glass cooktop of your appliance. Be sure to unplug or cut the circuit breaker to your appliance before starting this repair. Before replacing this part, be sure your appliance is getting enough power. If it is receiving less than the required 220 volts of alternating current, the surface element will not work.

Range surface element control switch - 6 inch - 1560 w (control switch for small surface element. The surface element switch sends voltage to the surface element coil. If the switch is defective, the surfac)

This switch controls the small burner on a range/stove top.

Rear support (rear drawer support _ part has been redesigned. The new support inserts towards the rear of the drawer as opposed to the side.)

This rear drawer support comes with the installation screw. This part has been redesigned. The new support inserts towards the rear of the drawer as opposed to the side.

Bottom trim chanel white (trim, door bottom channel, white)

Screw

Sold Individually.

Exterior door glass (glass ovn dr (wh))

Exterior glass panel only. This is not the entire door.

Light cover (lamp cover assembly)

The oven bulb lens cover is made of glass and is approximately 2.75 inches in diameter. The lens cover protects the light bulb from being damaged. If the lens is cracked, damaged, or missing it will need to be replaced. It is suggested to make sure that the lens cover is cool to the touch before you start this repair. To remove the bulb lens cover simply slide the retaining clip off and then remove the lens. Replace it with a new cover and slide the retaining clip back on to hold it into place. This is an OEM part sourced from the manufacturer.

Foot - leveller (plastic leveling leg)

Sold individually.

Broiler pan - large (broiler pan grill kit, porcelain, includes grill and bottom pan)

The broiler pan and insert allows you to cook on a stable surface while allowing the liquid to drain into the pan below making clean up easier. This part is gray in color, made of enameled porcelain for an easy-to-clean, durable and made to last. The pan measures approximately 17” wide by 13” deep, insert measures 15 1/2” wide by 13” deep. This is a genuine OEM part.

Lens (indicator light lens)

This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in fact, on. The lens is a little less than half an inch in diameter and is made of plastic. If the light behind the lens still works, you should be able to simply remove the front panel and pop the damaged lens out of position, then replace it with the new one. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Screw

This screw is sold individually.