JBS02 GE Range Parts List

1-15 of 455

Drip bowl - 6 inch (burner bowl 6")

This 6-inch chrome drip bowl measures about eight inches in diameter at the widest point at the top. This drip bowl is used to catch any drippings or food that falls/spills while cooking. This chrome drip bowl is compatible with most electric ranges that utilize plug-in surface burners. If the drip bowl becomes rusted or damaged, you should replace it to avoid any grease or food that could drop down inside the range. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP244394
Availability:
In Stock - Ships Today
Price:
$17.15

Drip bowl - 8 inch (burner bowl 8")

This eight inch drip bowl is chrome in color and measures approximately 10 inches in diameter at the widest point. The drip bowl is used to catch anything that may spill over to make cleaning up a little quicker. Over time the drip bowl may become rusty, burnt, or worn down, and will need to be replaced. The drip bowl is a genuine OEM part and is sold individually.

Easy Part #:
EAP244395
Availability:
In Stock - Ships Today
Price:
$15.12

Bake element

This partially open-style bake element comes with ¼-inch push-on terminals and is located on the bottom of the oven. This bake element provides heat for baking. If your oven is too hot, not heating evenly, the element is not heating, or has little to no heat when baking, you may need to replace your bake element. You can use a multi meter to test the bake element for electrical continuity to see if you need to replace it. This is a genuine OEM part. Please remember to disconnect the power to the range before starting your repair.

Easy Part #:
EAP249247
Availability:
In Stock - Ships Today
Price:
$51.31

Bake element - 220v 2300w (oven bake heating element with screw-on terminals. The element is 18-1/4 inches wide, 14-1/2 inches deep to mounting flange. Terminal ends extend 2-1/)

This closed-hinged style bottom bake element is located on the bottom of the oven cavity to supply the heat for baking. This bake element has screw-on wire terminals is 18 1/4-inch wide and 14 1/2-inch deep to mounting flange and the terminal ends extend 2 1/2-inch past the flange. The element is 2300 watts and 20 volts. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. This is a genuine OEM bake element. Please remember to disconnect the power to your oven before you start your repair.

Easy Part #:
EAP249466
Availability:
In Stock - Ships Today
Price:
$49.14

Bake element - push on terminals - 240v (bake element)

The bake element is located on the bottom of the oven with male spade terminals and push-on terminals. The bake element provides heat for baking. If your oven is too hot, not heating evenly, element is not heating, or little to no heat when baking, you may need to replace your bake element. This is a genuine OEM part. Please remember to disconnect the power to the range before starting your repair.

Easy Part #:
EAP249238
Availability:
On Order
Price:
$82.03

Surface burner terminal block kit (terminal block w/wires)

This kit includes the female contact with wires, terminal block and mounting clip.

Easy Part #:
EAP783534
Availability:
In Stock - Ships Today
Price:
$19.03

Drip bowl - 6 inch (unit pan 6")

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

Easy Part #:
EAP244677
Availability:
In Stock - Ships Today
Price:
$9.85

Trim ring - 6 inch (trim ring 6")

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

Easy Part #:
EAP244475
Availability:
In Stock - Ships Today
Price:
$7.95
Easy Part #:
EAP242972
Availability:
In Stock - Ships Today
Price:
$29.75

Infinite heat switch kit (switch, inf surface unit)

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

Easy Part #:
EAP16216966
Availability:
In Stock - Ships Today
Price:
$48.33

Single heating element support clip (broil element support)

The support clip is used to hold the broil element in place at the top of the oven cavity. If the clip is broken or damaged, you will need to replace the part. The support clip is made of metal, is a little over an inch long, and is sold individually. This is a genuine OEM part.

Easy Part #:
EAP243701
Availability:
In Stock - Ships Today
Price:
$8.66

Drip bowl - 6 inch (burner bowl 6")

This 6 inch chrome drip bowl is intended for use with solid terminal plug-in style surface burner units on electric ranges.

Easy Part #:
EAP244800
Availability:
In Stock - Ships Today
Price:
$9.51

Trim ring - 8 inch (trim ring 8")

This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

Easy Part #:
EAP244479
Availability:
In Stock - Ships Today
Price:
$11.26

Oven rack

This single chrome oven rack provides a reliable flat cooking surface for your cookware inside of the oven cavity. The oven rack is made of metal and measures approximately 24” wide by 17 1/2” deep. This is a genuine OEM part and is sold individually. Please order quantity needed.

Easy Part #:
EAP6447646
Availability:
In Stock - Ships Today
Price:
$63.44

Broil element (broil unit 208/240v)

The broil element is located on the roof of the oven cavity to supply heat for broiling. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. The mounting bracket is not included with the element. If the element is no longer heating or it has shorted out, then you will need to replace your broil element. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:
EAP249411
Availability:
In Stock - Ships Today
Price:
$27.81
1-15 of 455