JES1131WC Parts List

Secondary door switch (switch micro)

The secondary door switch, also known as a micro switch, works in conjunction with your microwave by monitoring the door latch position and sending communication to the electronic control board to let it know if the latch is open or closed. When the door is shut, the door switch will close to send power to the microwave to operate. If the microwave won’t start, the switch has failed, and the part will need to be replaced. You can test the switch for continuity. This part measures 1.5” L x .75” W. Due to the high voltage capacitor in the microwave, it can retain a lethal electrical charge, even when unplugged, it is suggested to have a service technician install the part. Please disconnect power to the microwave before beginning the repair. This is a genuine OEM part.

Fuse (fuse-cartridge)

The line fuse, also known as a ceramic fuse, is used to protect your microwave when there is a power serge by shutting down the microwave to avoid damage. If your microwave has no heat, won’t turn on, or the touch pad is not working properly, you may need to replace the fuse. This part measures approximately 1.25” long and is sold individually. Please remember to disconnect power to the microwave before starting the repair. This is a genuine OEM part.

Tray-cooking;jvm-1860,gl (glass carousel tray, 14-1/4 inches in diameter)

If you discover that the glass cooking tray in your microwave is damaged, you may have to replace it to operate the microwave properly. The glass cooking tray connects to the turntable of the microwave and rotates to ensure even cooking. This part is made entirely of glass, and is about 14 inches in diameter. Many of our customers rated this repair as very easy. To complete the repair, simply remove the old cooking tray and replace it with the new one. Be sure to remove any broken pieces with the old cooking tray. This product is sold individually.

Diode (diode-h.V)

This part allows power to go one way only.

Ceramic fuse - 20 amp (20 amp ceramic line fuse)

The ceramic fuse protects the microwave by shutting it off if there is an electrical surge. If your microwave is not turning on, you may need to replace the fuse. This part is 20 amp, just over an inch long, metallic on both ends and ceramic in the middle. This is a genuine OEM part. Please remember to disconnect power to your microwave before starting your repair.

Oven cavity thermal cut out (thermostat)

Also known as a Sensor or Fuse. This part will trip once the inside of the cavity overheats and exceeds the recommended temperature.

Roller guide (guide roller ass'y)

Magnetron assembly (magnetron ass'y)

This part is used to generate microwave energy/heat.

Assembly guide roller;jes831 (roller guide)

The turntable tray support holds the turntable tray while allowing the tray to rotate.

Spring - button (spring-button)

Turntable drive motor (motor-turn table)

Coupler

Thermostat

Motor synchronous;ssm-16 (motor synchronous)

Glass cooking tray (tray cooking)