JGBS04BEMW GE Range Parts List

Flat style oven igniter kit (oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Amperage range is 3.3 to 3.6.)

The flat style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, then your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter please be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3-3/4" in length and the amperage range is 3.3 to 3.6. The kit comes with a mounting bracket and a wire connector with a plug. *Please note: the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. This is a genuine OEM part.

Double burner assembly (stove top double surface burner kit.)

Both burners are mounted on the same bracket.

Door bumper - black (bumper black)

The oven door bumper is used to protect the exterior of the oven when the door is closed. By installing the door bumpers, it will prevent the drawer door from rubbing against the cabinet. If one breaks or goes missing you will need to replace the bumper. This part is black in color, made of rubber, and is sold individually. This is a genuine OEM part.

Oven handle end cap - left or right side (oven door handle end cap, black.)

This oven handle end cap connects to your oven door handle, and acts as the joint that connects it to the oven door. This part is made of black plastic and can be used as the left or right-side end cap. If your oven door handle is loose or disconnected, this part may fix the problem. The end cap will need to be screwed into the oven door itself, but simply snaps in to the door handle. This part is sold individually.

Oven rack (oven rack.)

This single chrome oven rack provides a reliable flat cooking surface for your cookware inside of the oven cavity. The oven rack is made of metal and measures approximately 24” wide by 17 1/2” deep. This is a genuine OEM part and is sold individually. Please order quantity needed.

Oven thermostat (oven thermostat assembly. This thermostat monitors the temperature inside the oven and cycles on the heat when the oven drops below a set temperature.)

This part establishes and maintains the internal temperature of the oven cavity.

Screw

Gasket door asm (oven door gasket with mounting clips.)

This oven door gasket prevents heat from escaping the oven cavity when in use. It contains all of the attaching clips needed for installation.

Liquid propane orifice spud (surface burner orifice, propane)

This is the replacement propane orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies liquid propane from the gas line to the stove top. Be sure to disconnect your range from its power source and turn off the gas line before you begin this repair. The orifices should simply screw out, and the new one will screw in. This part is about ¼ of a inch in diameter and is gold in color. It is sold individually and is a genuine OEM part.

Ignitor mounting screw (screw)

Sold Individually.

Oven safety valve - natural gas (oven safety valve)

This gas oven safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.

Burner bake tube (oven burner tube)

This item no longer comes with the igniter.

Thermostat knob (thermostat knob, black)

This is the replacement thermostat knob for your oven. It is made of black plastic and has temperature settings printed on it. The thermostat knob connects to a shaft on your oven and allows you to turn the oven on and off, adjust the temperature, and use the broil setting. If your old knob is worn, stripped, damaged, or missing, this is the part that will replace it. To replace the thermostat knob, carefully remove it from the shaft and replace it with the new knob. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Screw

Size: 10-32 GXTT FLP .595 Sold individually.

Door handle (oven door handle, black)

This is a replacement door handle for your oven. It is made of black plastic and is approximately 30 inches long and 1.5 inches wide. The oven door handle attaches to the door and allows you to open the door easily. The main reason to replace the oven handle would be if the handle is broken or missing. This part is sold individually and is an OEM part sourced directly from the manufacturer.