KD935ADK Westinghouse Range Parts List

Drip bowl - 8" (chrome drip bowl (also called a drip pan) for 8-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the bu)

The eight-inch drip bowl sits under the surface burner element to collect anything that may drip or spill over, to make cleaning up quick. This bowl measures approximately 10-inch in diameter at its widest point at the top. If your drip bowl becomes damaged or rusted it is best to replace the drip bowl to avoid any grease or spills from dripping down inside the range. This chrome drip bowl is compatible with most electric ranges that utilize plug-in surface burners. This is a genuine OEM part and is sold individually.

Chrome drip bowl - 6" (chrome drip bowl for 6-inch burner. This drip bowl sits underneath the burner to catch drips or spills.)

The 6-inch drip bowl sits under the burner to catch anything that may spill over to make cleaning up spills quick. This chrome drip bowl is compatible with electric ranges that utilize plug-in surface burners. This bowl measures approximately 8-inches in diameter. If your drip bowl becomes damaged or rusted it is best to replace the drip bowl to avoid any grease or spill from dripping down inside the range. This is a genuine OEM part and is sold individually.

Terminal block kit (stove top surface element terminal block kit with interchangeable mounting brackets. The kit also includes ceramic wire nuts, heat shrink protective t)

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or is not heating properly, it is likely an issue with the terminal block and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Bake element - 240v (oven bake heating element with push-on wire terminals. If the oven won't heat, the bake element may have burned out. Often, if the bake element has bu)

This heating element is a partially open-style bake element. Carrying 240V and 2000W, it is 19-1/4" wide by 15" long. The two 90-degree push-on male spade terminals are 13-3/4" apart.

Surface element - 8 inch - 2600w (8 inch electric coil surface element with looped terminals, 2600 watts. 5 turns.)

This surface burner element is eight inches in diameter. It has five turns, 2600 watts and looped terminal ends. The element provides heat to the cooking surface on your range. If your element is not heating, you may need to replace this part. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part. It is sold individually.

6-inch coil burner element (6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn.)

This 6-inch element has looped terminal ends, 1250 watt, four turn and comes with a black medallion center. The element provides heat to the cooking surface on your range. If your element is not heating, you may need to replace the element. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part and is sold individually.

Broil element (oven broiler heating element with push-on terminals)

This fully open fixed oven broil element carries 240 volts and 2750 watts.

2 pack light bulb - 40w

Gasket (oven door gasket/seal)

This oven door gasket prevents heat from escaping the oven cavity when in use.

Hinge (hinge arm, oven door)

Spring-oven door

Lens (indicator light lens cap, red)

4 wire cord - 4ft - 50amp (electric range power cord kit, 4 foot 50 amp 4 wire with closed eyelets and strain relief)

4`-3 wire 40amp ran (electric range power cord kit, 4 foot 40 amp 3 wire w/open eyelets & strain relief)

Clock-digital/silve (clock/timer kit, silver)