KTM2843-87B Parts List

Flat style oven igniter (oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Overall length is 3.72", amperage range 3.2 t)

The flat-style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter, be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3.72-inch in length and the amperage range is 3.2 to 3.6. This is a genuine OEM part.

Surface burner igniter electrode

Use this igniter with sealed burners.

Oven thermostat - 125v 60hz (oven temperature control thermostat. If the oven does not heat or the temperature is off by more than 50 degrees than the oven thermostat may be defe)

This part establishes and maintains the internal temperature of the oven cavity.

Drip pan (drip pan for gas range top burner)

This part is located beneath the element and catches any spills.

Safety valve (gas safety valve)

This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.

Burner cap (burner cap, black)

Spark module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Oven door seal with clips (oven door seal with retainer clips attached, 50 inches long)

Igniter switch (gas surface burner spark igniter switch)

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

Burner grate (burner grate, kit of 4)

Sold Individually.

Hinge with spring - left or right side (oven door hinge with spring)

Sold Individually.

Switch (oven light switch)

Valve-top burner (top burner gas valve)

Knob-thermostat (thermostat knob)

Clock/timer control board (clock and timer assembly)