KTM285840-C Parts List

Flat style oven igniter (oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Overall length is 3.72", amperage range 3.2 t)

The flat-style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter, be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3.72-inch in length and the amperage range is 3.2 to 3.6. This is a genuine OEM part.

Porcelain drip pan (burner drip pan for gas stove, black. This drip pan sits underneath the burner to catch drips or spills.)

This part is the replacement porcelain drip pan for your range or cooktop. It is a square-shaped drip pan and is black in color. It is approximately 9 inches in length and 9 inches in width. The drip pan will have one slightly rounded edge, and one flat edge, with a circular hole in the center that is approximately 2 1/8 inches in diameter. The porcelain drip pan sits under the surface burner and catches spills. The main reason to replace the drip pan is if it is cracked or damaged. Be sure that your range is off, and the surface is cool to the touch before beginning this repair. This is an OEM part from the manufacturer.

Surface burner igniter electrode

Use this igniter with sealed burners.

Burner cap (burner cap, black)

Spark module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Dual oven safety valve (dual gas safety valve assembly. The gas oven safety valve works with the oven igniter to provide gas to the burner. If the safety valve fails, the ove)

Used for both bake and broil. This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

Flat style oven igniter - broiler (broiler igniter assembly with bracket and wires, amperage range 3.2 - 3.6)

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

Door hinge with spring (oven door hinge assembly with spring)

Sold Individually.

Clock knob

This black clock knob allows you to adjust the clock located in the control panel section of your range. The clock knob is less than an inch long, made of plastic, and is sold individually. This genuine OEM knob will accept a 'D' shaped shaft.

Oven door seal with metal mounting clips

Igniter switch (gas surface burner spark igniter switch)

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

Burner grate (burner grate, kit of 4)

Sold Individually.

Range analog clock/timer (clock/timer)

Gas pressure regulator with mounting bracket (gas pressure regulator with bracket)

Valve-top burner (top burner gas valve)