LMX28987ST LG Refrigerator Parts List

Handle screw (stopper,handle)

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.

Door bin - white/clear (basket assembly,door)

This gallon-size door bin can be moved according to space needs. The door bin holds items on the door of your refrigerator/freezer. They are sometimes called cantilever shelves as they are supported by the back of the shelf itself to the door of your refrigerator. If they become cracked or damaged, you should replace the bin. This bin is white in color with a clear front insert. This part is a genuine OEM part and is sold individually.

Refrigerator door switch

The light switch lights up the interior cabinet of the refrigerator or freezer when the door is opened. If you open the door and the light won’t come on, or the light is always on, you may need to replace the light switch. The switch is white in color and measures approximately 2 1/2”. This is a genuine OEM part. Please remember to disconnect the power before starting the repair.

Plastic tube - 5/16 inch (tube,plastic)

The 5/16” plastic water tubing attaches to the water inlet valve and goes into the refrigerator. The tubing supplies water to the water dispenser and the ice maker. If the tubing becomes damaged or cracked, it can cause water to leak out onto the floor and the water tubing will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power and water supply before starting the repair.

Bottom door bin (basket assembly,door)

The door bin is attached to the inside of the refrigerator door, and typically holds condiments, jars, and bottles. This OEM basket assembly is made of white and clear plastic. Measures approximately 16 inches long x 4 1/2 inches high x 5 inches deep. These parts should fit tightly to the door of your refrigerator, if yours is loose you should replace it immediately, as it could result in its contents spilling into the inside of your refrigerator, or onto the floor.

Refrigerator water filter (filter assembly,water)

This OEM filter measures 2.5 inches deep, 12.5 inches high, 5 inches wide and roughly 1.5 lbs. It is recommended to replace this filter every six months or 300 gallons, whichever comes first. If you notice an unpleasant taste in your water or it suddenly dispenses much slower, these are also common indications that a replacement is necessary. It filters sediment, dirt, rust, cysts, lead, mercury, and more. For proper use, operating pressure should be 30-120 PS, operating temperature should be 33-100 degrees Fahrenheit, with a flow rate of 0.5 gallons per minute. Installation is quick and easy and does not require the use of tools.

Ice maker assembly (ice maker assembly,kit)

The wire harness is NOT available separately. Refrigerator ice maker kit AEQ36756901 is an original equipment manufacturer (OEM) part that fits some refrigerators in these series: Kenmore 795; Kenmore Elite 795; and LG LFX, LMX and LSC. Ice maker AEQ36756901 receives water from the water inlet, holds the water in the ice mold until the water freezes solid and then automatically ejects the ice and refills to continue the process until the ice storage in is full. This ice maker kit contains the complete ice maker, housing and control device.

Water inlet valve assembly (harness assembly)

This includes the primary and secondary valves along with the wire harness.

Glass shelf (shelf,glass)

This is the replacement shelf glass for your refrigerator. It is made of glass and is approximately 31 inches wide and 16 inches long. The shelf glass for your refrigerator slides over the crisper cover and acts as a sort of lid. It also creates a shelf that you can place food and beverages on. If your current shelf insert glass is broken, this part is the appropriate replacement. Many of our customers have described this repair as easy. To complete the repair, carefully remove the old glass from the frame and replace it with the new pane of glass. This part is sold individually and is an authentic OEM part.

Primary water valve - single coil

Door gasket - left side (gasket assembly,door)

This door gasket assembly is for the left refrigerator door. The gasket attaches on the inner door panel to create a seal around the door to keep the cool air inside and avoid the warm air from entering. If your gasket is torn or no longer sealing the door it will need to be replaced. This gasket is gray in color, made of rubber and measures 18” x 40”. To smooth the creases and folds in the new gasket, soak it in warm water and let it dry. You can also try carefully warming it with a hair dryer or heat on a low setting, but be careful not to melt the gasket. This is a genuine OEM part.

Door gasket - right side (gasket assembly,door)

Refrigerator ice bin (bucket assembly,ice)

This ice bin is for refrigerators. Ice bin stores ice cubes in the freezer section of the refrigerator. Follow the instructions in the owner's manual when installing this part.

Cam,shaft

Cam,shaft

The door latch cam, also known as a hinge lever, latches the door when you close it. The latch cam attaches to the left side flipper seal cover to catch the pivot guide in the refrigerator to keep the doors closed. This part is approximately 2 1/2” long, white in color, made of plastic and is for the left side. This is a genuine OEM part and is sold individually.