LRSC26925W LG Refrigerator Parts List

Refrigerator water filter (ice and water replacement filter reduces contaminants including lead, chlorine, and mercury.)

This OEM filter measures 2.5 inches deep, 12.5 inches high, 5 inches wide and roughly 1.5 lbs. It is recommended to replace this filter every six months or 300 gallons, whichever comes first. If you notice an unpleasant taste in your water or it suddenly dispenses much slower, these are also common indications that a replacement is necessary. It filters sediment, dirt, rust, cysts, lead, mercury, and more. For proper use, operating pressure should be 30-120 PS, operating temperature should be 33-100 degrees Fahrenheit, with a flow rate of 0.5 gallons per minute. Installation is quick and easy and does not require the use of tools.

Ice tray (ice cube tray assembly.)

This part is the replacement ice tray for your refrigerator. The tray is made of white plastic and is approximately 9 inches in length, and 3 inches in width. It has the capacity for 8 ice cubes. The ice tray can be filled up with water and is the mold that shapes the ice cubes. If your current ice tray is cracked, warped, or if mineral deposits have settled inside it, it may cause the ice cubes to stick. This part is sold individually and is an authentic OEM part.

Water inlet valve assembly (refrigeraor water inlet valve assembly. The valve has three solenoid and features push-in fittings. To release tubing, pull the push-in ring toward th)

This water inlet valve has three solenoid valves and push in fittings. When energized this part releases water from the supply line into the ice mold.

Ice chute door - heated (ice chute door)

Switch,push button (switch,[push])

Guide assembly,rail (drawer rail guide)

Refrigerator water tube fitting (tubing connector, quick connect 5/16" to 5/16")

The water tube fitting connects lines that supply water to components such as the ice maker and water dispenser.

Light bulb (incandescent lamp, 120 volts, 40 watts)

Hinge assembly,lower (hinge assembly, lower)

Guide assembly,rail

This part is the replacement crisper pan slide rail for your refrigerator. It is made of white plastic and is approximately 13 inches by 2 inches. The crisper drawer will slide in and out along this rail. If the rail is damaged or missing, the crisper will either hang from one side, or it will not stay in place at all. The crisper slide rail is for the left side of the drawer only, so be sure to check that you are replacing the correct drawer rail. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Guide,rail (guide rail)

Solenoid assembly (dispenser solenoid)

Lever,hinge

Leg assembly,adjust

Plastic tubing - 5/16 inch (5/16 inch o.D. Plastic tubing)

This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or if it will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged, and use the union to attach the new water line to the old one. This tubing is sold individually and is an OEM part.