MGR5750ADH Maytag Range Parts List

Flat style oven igniter kit (oven igniter kit. Can replace igniters for either bake or broil burners. Replaces shorter and longer igniters in many instances. Amperage range is 3.3)

The flat style gas oven igniter is used to ignite the gas to light the oven burner, which produces heat for your range. If the element has shorted out, is no longer glowing, or is glowing but only orange or red rather than white, then you will need to replace the oven igniter. When replacing the igniter please be very careful not to touch the gray element part of the igniter as it is very fragile. The igniter measures approximately 3-3/4"in length and the amperage range is 3.3 to 3.6. This igniter kit can replace igniters for either the broil or bake burners and can replace shorter and longer igniters. The kit includes the igniter, 4 wire nuts, insulation, 2 wire assembly and a bracket. This is a genuine OEM part. Please make sure to disconnect the power and shut off the gas supply before starting your repair.

Top burner igniter (stove top spark electrode for burner.)

This top burner igniter has a male spade terminal. It is used to create a spark that will light the gas and start the burner when the burner knob is depressed and turned. The mounting bracket is included with the igniter. If your element will not heat, will not start, or the gas igniter glows but will not light, you may need to replace the igniter. This is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.

Sealed burner cap with electrode (sealed gas burner head assembly, 1 gray burner head with spark electrode. Rotate assembly counter clockwise to release burner from the main top. *no g)

This burner cap assembly is sold with the spark electrode. Please note this part has been redesigned and no longer requires a gasket. Sold individually.

Screw (screw 8 x 1/2)

This screw is half an inch long. It is made of metal and is intended for use with ranges, refrigerators, and washing machines.

Burner head cap with spark electrode (sealed gas burner head assembly, 1 black burner head with spark electrode. Rotate assembly counter clockwise to release burner from the main top. *no)

This part distributes flame evenly to your cookware.

Door gasket

The oven door gasket prevents heat from escaping the oven cavity when in use by creating a seal around the oven door. If your oven has little or no heat when baking, you may need to replace the gasket. This door gasket contains all the attaching clips needed for installation and is a genuine OEM part. Please make sure the oven is cool before installing the door gasket.

Door top trim (top trim, door, white)

This top door trim is just over thirty inches long. It is all white in color and is made of plastic.

Inner door glass pane (inner oven door glass. Measures 20 5/8 inches by 13 1/8 inches.)

The interior oven door glass is the innermost heat resistant piece of glass that faces in your oven. The see-through glass measures approximately 20 5/8” x 13 1/8”. If the glass is cracked it should be replaced. When replacing the interior door glass please wear gloves to protect your hands in case the glass breaks and do the repair when the door glass is cool to touch. This is a genuine OEM part and is sold separately.

Spark module - surface burners (spark module for surface burners. This spark module provides power to the spark electrode to produce a spark. If it is defective, the burner may not l)

This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Burner orifice fitting assembly - right side (top burner supply assembly)

Dual outlet oven safety valve (dual oven safety valve)

This gas oven safety valve is used to make sure that no gas is released until the igniter is ready to ignite. This part is for both the bake and broil igniter in your appliance.

Round snap nut - black (nut, snap (round-blk))

Screw (screw (wht))

Sold individually.

Storage drawer wheel and shaft (drawer support roller)

This wheel and shaft is used to open and close the bottom storage drawer of a range/stove.

Stand mixer screw (screw, round head machine thread, 10-24 threads x 1/4" long.)

This screw is sold individually.