MS-4842DP Parts List

Micro switch (microwave door switch. This switch is normally open. When the microwave door is shut, the door switches close to send power to the microwave.)

The microwave primary door switch, also known as a micro switch, is normally open. When the door is shut, the door switch will close to send power to the microwave to operate. If the microwave won’t start, then the switch has failed, and the part will need to be replaced. The micro switch is in the latch board section and monitors the position of the door. This part measures 1.5” L x .75” W NOTE: Due to the high voltage capacitor in the microwave, it can retain a lethal electrical charge, even when unplugged. It is suggested to have a service technician install the part. This is a genuine OEM part. Please disconnect the power to the microwave before beginning the repair.

Motor, ac synchronous (microwave circulating motor, synchronous. 21 volts 3 watts 2.5 to 3 rpm.)

Turntable assembly (glass tray support with rollers.)

The turntable support assembly is also known as a roller guide and fits under the cooking tray and is used to support the tray and to engage the rotating coupler. The support assembly has 3 arms and each is approximately 4 inches long. If your cooking tray will not turn, check the support assembly for signs of damage. If no damage can be seen, check the coupler for damage.

Screw,tapping (truss head tp screw+2 cut)

Magnetron

This part is used to generate microwave energy/heat.

Glass cooking tray (tray,glass)

Diode (cable, assembly) (microwave diode assembly)

Lever (door release lever)

Spring (spring latch mh-630h 640c)

Spring (spring, door open button)

Thermostat

Capacitor,high voltage (radial capacitor)

Locker (door latch)

Cover,insulator (canopy,[resin])

Screw,tapping (tapping screw)