PCF23NGTC GE Refrigerator Parts List

Refrigerator ice and water filter (filter canister)

Ice maker (electronic im domestic)

This ice maker assembly is used to make ice in your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold into the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. This kit includes the fill cup, 4-pin wire harness adapter, and a tube. Disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Water valve with guard (water valve)

This double inlet water valve has quick connections. This valve has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.

Temperature sensor (sensor temp ff)

The temperature sensor, also known as a thermistor, helps detect the temperature inside the refrigerator and sends the information to the control board. If your refrigerator is too warm or not cooling properly, you may need to replace the temperature sensor. This is a genuine OEM part. Please make sure to disconnect the power to the refrigerator before starting your repair.

Main control board assembly (board asm main control)

This board controls the operation of the unit and is located on the back of the refrigerator. The defrost controls are built-in to the control board. If your refrigerator is too hot or cold, will not defrost, runs to long, or the ice maker will not work, you may need to replace the control board. Note: This is a genuine OEM part and has been updated by the manufacturer. It may differ in appearance but will function the same as the original.

Defrost thermostat

This defrost thermostat acts as a safety device against over heating in case of mechanical failure.

Evaporator fan grommet - red (grommet evap fan)

This red evaporator fan motor grommet provides a cushion between the fan motor and the motor mounting bracket. If the grommet is damaged and you are getting noise from the fan motor, you may need to replace it. This is an OEM part sourced directly from the manufacturer. Please remember to disconnect the power to the refrigerator before starting your repair.

Module shelf insert

This part is located in the front of the module shelf.

Ice dispensing drive cup (cup drive)

This part is found at the end of the auger in the ice container - replace this part when the icemaker doesn't dispense ice.

Dispenser door solenoid assembly (solenoid asm)

This part is a possible option when ice door won't open or shut properly or when water is not dispensing.

Dispenser door assembly or flapper (refrigerator ice dispenser damper door. The crank is no longer sold with the damper door. You will have to reuse the old crank.)

The ice chute door opens to dispense ice once activated. This part mounts in the ice dispenser. If it is too warm inside your refrigerator, there is frost build up, or your icemaker will not make or dispense ice, you may need to replace the ice chute door. The crank no longer comes with this part, but you can use the original crank. The crank is sold separately depending on the model number of your appliance. The ice chute door is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Defrost heater and bracket assembly (heater & bracket asm)

The defrost heater keeps the cooling coils from frosting over. The heater will get hot and melt any ice or frost build up around the coils.

Handle/front (handle)

For freezer baskets.

Evaporator/condensor fan grommet (grommet motor)

The evaporator fan motor grommet provides a cushion between the fan motor and the motor mounting bracket. This part is made of black plastic and is approximately one inch in diameter. If your grommet is torn or damaged and you are getting noise from the fan motor, you may need to replace it. This is an OEM part sourced directly from the manufacturer. Please remember to disconnect the power to the refrigerator before starting your repair.

Evaporator fan motor (motor evap dc)

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. Note: Thermistor is NOT included. If you need the motor with the thermistor, see related parts.