PTC22MFMRW GE Refrigerator Parts List

Refrigerator ice and water filter (ice and water filter)

Water valve with guard (refrigerator water inlet valve assembly with quick connect fitting . To disconnect the tube, push the white retainer fitting in while pulling on the)

This double inlet water valve has quick connections. This valve has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.

Dispenser door assembly or flapper (refrigerator ice dispenser damper door. The crank is no longer sold with the damper door. You will have to reuse the old crank.)

The ice chute door opens to dispense ice once activated. This part mounts in the ice dispenser. If it is too warm inside your refrigerator, there is frost build up, or your icemaker will not make or dispense ice, you may need to replace the ice chute door. The crank no longer comes with this part, but you can use the original crank. The crank is sold separately depending on the model number of your appliance. The ice chute door is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Light bulb - 40w (40 watt clear appliance bulb)

This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.

Union connector - 5/16 inch to 5/16 inch (plastic connector for 5/16 inch plastic water line)

Quick connector for plastic water line - 5/16" to 5/16"

Run capacitor (refrigerator run capacitor 12 uf. If this run capacitor is defective, the refrigerator will not run.)

The run capacitor is attached to the compressor and is 12 UF. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Dispenser control board - 2 slide switches (refrigerator control board for ice and water in the door.)

It is used with those refrigerators that have an ice and water dispenser in the door.

Defrost timer - 120v 60hz (refrigerator defrost timer assembly. Turn the dial on the timer clockwise to advance it into and out of defrost.)

The defrost timer acts like a clock, continually advances and alternates between activating the cooling cycle and the defrost heater. This 120V 60Hz defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange. If your refrigerator is too warm, freezer section is too warm, freezer is not defrosting, or leaking, you may need to replace the defrost timer. This is a genuine OEM part. Please remember to disconnect the power before starting the repair.

Package of 12 screws (screws, pkg of 12.)

This is a package of twelve Phillips-head screws. They can be used as replacement screws in refrigerators, ice makers, or freezers. Be sure to check that your appliance model is compatible with these screws. The screws are approximately ¾ of an inch in length.

Water valve and bracket assembly (primary and secondary refrigerator water valve assembly. This valve has been updated by the manufacturer; it is now a quick-connect style valve.)

This water valve assembly has been redesigned. It has a new quick connect style valve. To install: Cut original plastic nuts off tubing and gently push into valve until they stop. No other nuts or connectors needed.

Light socket

This part is a replacement light socket for your refrigerator. It connects to the power source, and holds the light bulb. If the light in your refrigerator is not working, you could have a faulty socket. It is important to determine if the light bulb is simply burned out, or if the socket is causing the issue. Be sure to disconnect your refrigerator from the power source before you begin this repair. This socket is black in color and is sold individually. This is an OEM part sourced directly from the manufacturer.

Primary water inlet valve (primary water valve, dual coil, with quick connect outlet and mounting bracket)

This part has one port and 2 solenoids and comes with a mounting bracket. The water valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold.

Mwf bypass (cap, water filter bypass)

This part is a replacement filter bypass cap for your refrigerator. If you intend to use an external water filtration system for your refrigerator, the bypass cap will allow you to do so. To use a filter bypass cap, simply screw it in where you would normally screw in the regular water filter. If you have a bypass system installed and your ice maker doesn’t make ice, your water dispenser doesn’t make water, or if there is water dripping inside your refrigerator, you may need to replace the bypass filter cap. This part is made of white plastic and is sold individually.

Actuator pad (dispenser actuator pad. *only available in black per manufacturer.)

Note: This part is now ONLY available in black.

Ice dispensing drive cup (drive cup)

Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.