RGB745WEHW GE Range Parts List

Flat style oven igniter kit (oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Amperage range is 3.3 to 3.6.)

The flat style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, then your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter please be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3-3/4" in length and the amperage range is 3.3 to 3.6. The kit comes with a mounting bracket and a wire connector with a plug. *Please note: the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. This is a genuine OEM part.

Oven rack (oven rack.)

This single chrome oven rack provides a reliable flat cooking surface for your cookware inside of the oven cavity. The oven rack is made of metal and measures approximately 24” wide by 17 1/2” deep. This is a genuine OEM part and is sold individually. Please order quantity needed.

Top burner spark electrode (stove top burner spark electrode. If the gas burner fails to light, inspect the spark electrode for cracks.)

The spark electrode helps create a spark to ignite the burner to produce the flame for cooking. If your gas igniter glows but will not light, you may need to replace this part. Please remember to disconnect the power and the gas supply to the range before you start your repair. This is a genuine OEM part and is sold individually.

Oven sensor (oven temperature sensor assembly. The oven sensor works in conjunction with the oven control board to regulate the oven temperature.)

The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is a genuine OEM part. If your oven is too hot, not heating evenly, has little to no heat when baking, or is flashing F3/F4 error messages on your control board, you may need to replace it. Make sure to disconnect the power to your range before starting your repair.

Light bulb - 40w (40 watt clear appliance bulb)

This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.

Burner head - medium - 9500 (top burner, medium)

Small burner - 5k (small burner, 5k)

Sold individually.

Burner cap - medium (burner cap, medium, gray)

This part is the replacement burner cap for your gas range. It is made of gray plastic and is approximately 3 inches in diameter. It has 3 small tabs on the bottom, with one tab that is larger than the others. This tab fits into the v-shaped slot. The burner cap is found under the grate, and it protects the burner. If your current burner cap is damaged or missing, this is the part that replaces it. Before you begin this repair, be sure that the burner cap and the grate are cool to the touch. To replace the burner cap, simply lift the grate off and remove the cap. Replace it with the new cap to complete your repair. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Top electrode mounting clip (electrode clip)

Sold individually.

Burner grate (grate (gray))

Sold individually.

Cooktop mounting screw (screw cktp 6-32x12)

This is a replacement cooktop mounting screw, used to secure the burner. If you are missing that screw on your range, this is the part to replace it. This screw is about a half an inch in length and is sold individually. It is an OEM part sourced directly from the manufacturer.

Left front orifice (left front burner tube with natural gas orifice 9,500 btu)

This is the replacement left front orifice for your gas range. When your range is operating, gas flows through the orifice to the igniter. This part is the orifice itself as well as the metal holder that holds it in place. If you notice a gas smell when your range is on, you could have a loose or damaged orifice. This part fits the front left burner in your range, so make sure you are replacing the correct orifice. This is an OEM part sourced from the manufacturer and is sold individually.

Burner knob - white (range/stove burner knob in white)

This knob accepts a D shape shaft. Sold individually.

Burner with igniter (bake burner and igniter kit. *connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts. (wire nuts not included.))

The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.

Ignitor mounting screw (screw)

Sold Individually.