RSF320OUL-P1141264N Parts List

Flat style oven igniter (oven igniter assembly. You must reuse the bracket from original igniter.)

This part is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter, be very careful not to touch the black element part of the igniter as it is very fragile. You will need to reuse the original bracket when installing the new igniter.

2 piece broiler pan (porcelain broiler pan set, aluminum grid allows juices to flow off food into the porcelain pan below, measures 1-1/2" x 12-3/4" x 16-3/4")

The broiler pan and insert allows you to cook on a stable surface while allowing the liquid to drain into the pan below, making clean up easier. The measurements for the pan set are 1-1/2-inch x 12-3/4-inch x 16-3/4-inch and is a genuine OEM part.

Wire oven rack (oven rack)

This is a genuine OEM part that is used inside your range/oven to provide a durable surface for your cookware. The rack measures approximately 23 inches wide and 16 inches deep. The part is made of metal and is sold individually.

Spark electrode (spark ignition electrode with retaining clip)

This part helps your burner ignite and produce flame.

Screw

Sold individually.

Installation screw (infinite switch screw)

This screw is sold individually.

Single hex head screw (screw 1/4" hex head, 10-12 x 1/2)

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

Hinge kit - right side (door hinge kit, right side)

The oven door hinge assembly attaches to the right side of the door allowing the oven door to open, close, and stay open at an angle. If your oven door is not working properly then you may need to replace the hinge. It is recommended to replace both hinges at the same time. The hinge measures approximately 11 1/2” long, is made of metal, includes a spring and two screws. This is a genuine OEM part.

Spark ignition module with bracket (spark module for surface burners)

This part comes with the mounting bracket.

Hinge kit - left side (door hinge kit for left side. Use pointed screw to cut threads in new hinge holes.)

The oven door hinge kit attaches to the left side of the door to help control the opening and closing of the oven door. The door hinge also allows the oven door to stay open. The door hinge kit includes the left side hinge, screws and the spring. This hinge measures approximately 11 1/2” long and is made of metal. The manufacturer suggests using the pointed screw to cut threads in the new hinge holes.

Hex nut (nut,hex)

This hex nut will work with a variety of appliances. This part is made of metal and measures 8-32 x .124. Over time the hex nut will wear out and will need to be replaced and is recommended to order a spare. This is a genuine OEM part and sold individually.

Valve screw (screw)

Part might differ in appearance, but functions same as original. Sold individually.

Screw

This screw is sold individually.

Lock indicator light (light, indicator)

Clip, electrode * (electrode clip)

This clip is well under an inch in diameter. It is made of metal and it will help secure a range's electrode.