TFF24RCM GE Refrigerator Parts List

Ice maker (refrigerator icemaker kit, the kit includes the fill cup, 4 pin wire harness adapter, and tube.)

This ice maker assembly is used to make ice in your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold into the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. This kit includes the fill cup, 4-pin wire harness adapter, and a tube. Disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Door closing cam (refrigerator door closing cam. This is the upper closing cam located under the refrigerator or freezer door.)

This single door closure cam is mounted on the door, not the hinge.

Light switch (refrigerator light switch. This switch activates the refrigerator light when the door is open. It also prevents the dispenser from working if the door)

The refrigerator light switch turns the interior light off and on when you open or close the refrigerator door. The light switch also prevents the front dispenser from working if the refrigerator door is opened. If the switch has shorted out or the light bulb is not turning on when the door is open, you may need to replace the switch. This switch is white in color and measures approximately 1 1/2” L x 1 1/4” W. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting the repair.

Union connector - 5/16 inch to 5/16 inch (plastic connector for 5/16 inch plastic water line)

Quick connector for plastic water line - 5/16" to 5/16"

Package of 12 screws (screws, pkg of 12.)

This is a package of twelve Phillips-head screws. They can be used as replacement screws in refrigerators, ice makers, or freezers. Be sure to check that your appliance model is compatible with these screws. The screws are approximately ¾ of an inch in length.

Ice dispensing drive cup (drive cup)

Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.

Ice dispenser solenoid service kit (ice crusher solenoid plunger)

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.

Defrost thermostat kit (defrost thermostat kit, 55 degrees)

This refrigerator defrost thermostat will cut out at 55 degrees F and kick back in when the temperature drops to 35 degrees F. It comes with connectors and the mounting brackets.

Freezer shelf support (shelf support clip)

Sold Individually.

Evaporator fan blade kit (fan blade, plastic)

Condenser fan motor (condenser fan motor kit, ¼” spade terminal connection. *note: If original motor has a wire harness connection see related item below.)

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.

Screw (screw, pack of 12)

Comes 12 in a pack.

Door shim cam (shim)

Sold individually.

Shoulder screw (scr 8-18 ab ihxw 9/16 s)

This shoulder screw is sold individually.

Plastic tubing (1/4" plastic tubing, 8 1/2 feet long)

The water supply tubing is made of plastic and goes between the water inlet valve and the ice maker inlet tube. The tubing is 8 1/2 feet long and 1/4” in diameter. The water supply tubing transports water to the ice and water dispensers. If there is no water going to the ice maker, the refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace the water supply tubing. This is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.