TFH22RRAAD Hotpoint Refrigerator Parts List

Dairy door (refrigerator dairy door, rotates up, clear plastic)

Ice dispenser solenoid service kit (ice crusher solenoid plunger)

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.

Door hinge shim

This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.

Ice bucket auger kit (icebucket auger kit)

This ice bucket auger kit come with an auger and a blade. Please note: As per manufacture the part shown in the picture is no longer available. The updated helix coil is now approximately 5". If you currently have the original part you will need to order the complete auger/bucket assembly.

Condenser fan motor - 115v (refrigerator condenser fan motor. 3 round pin connection terminals. The condenser fan motor draws air though the condenser coils and over the compress)

This part comes with 3 round pin connection terminals. This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

Defrost thermostat kit (defrost thermostat kit, 55 degrees)

This refrigerator defrost thermostat will cut out at 55 degrees F and kick back in when the temperature drops to 35 degrees F. It comes with connectors and the mounting brackets.

Freezer shelf support (shelf support clip)

Sold Individually.

Evaporator fan blade kit (fan blade, plastic)

Plastic tubing - 5/16 inch (plastic water line, 5/16")

This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged, and use the union to attach the new water line to the old one. This tubing is sold individually and is an OEM part.

Ice bucket (ice dispenser bucket)

Fill tube grommet (icemaker fill tube grommet)

This fill tube grommet is used on the icemaker.

Scr 8-18 tpt 1/4 (screw)

Evaporator fan motor kit (evaporator fan motor assembly)

This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer come with the part.

Screw (screw, pack of 12)

Comes 12 in a pack.

Freezer wire shelf (freezer shelf)