WHSB9000BC GE Washer Parts List

Search the entire WHSB9000BC by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 7 8
1-15 of 116

Tub dampening strap (washer tub dampening strap. If the washing machine tub is off-balance, then one or more of these straps may have broken.)

This part is used to support the tub and keep it in the center of the cabinet to reduce vibration. If your washer is making loud noises, or shakes or moves, one or more of the straps may have broken. It is recommended to replace all 4 tub dampening straps at the same time. This part is sold individually.

Easy Part #:
EAP271100
Availability:
In Stock
Price:
$8.95

Dual action agitator (washing machine agitator assembly.)

This plastic dual action agitator is white in color. It is approximately eighteen inches tall with a base diameter of about 12-1/4 inches. The agitator pivots back and forth, moving the clothes from the top to the bottom of the tub, through the detergent and water to wash them. If the agitator becomes damaged or will not agitate, you may need to replace the part. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP1482519
Availability:
In Stock
Price:
$57.86

Agitator coupling kit (washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.)

This is a washing machine agitator coupling kit also known as an agitator drive belt. It connects the transmission drive shaft to the agitator base. It includes the couple, gasket, and bolt. If the teeth on the coupler is worn out it will cause the agitator not to turn and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:
EAP1517844
Availability:
In Stock
Price:
$26.43

Tub seal (washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.)

The tub seal helps prevent any leaking around the transmission of your washer outer tub. If your washer is leaking you may need to replace the seal. The tub seal is located on the bottom of the outer tub, in the center where the transmission comes through to connect to the agitator. This is a genuine OEM part. It is suggested to have it installed by a qualified technician because the seal can be difficult to replace. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP4704237
Availability:
In Stock
Price:
$12.50

Drain hose (washing machine corrugated drain hose, 4-1/2 feet. If the drain hose is cracked, it will leak water during the washer's drain cycle.)

This corrugated drain hose carries the drain water from the washer to the house drain. It is black in color, measures 57-inches long, and both ends of the drain hose can be bent. If your drain hose becomes damaged or cracked, it will cause water to leak on the floor during the wash cycle and you will need to replace the hose. This is a genuine OEM part. Please make sure you shut off the water supply and disconnect the power to the washer before starting your repair. Note: Clip is not included.

Easy Part #:
EAP890597
Availability:
In Stock
Price:
$24.10

Drain pump and motor assembly (washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle.)

This drain pump motor helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking, or pumps but will not spin, you may need to replace the drain pump motor. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP8768445
Availability:
In Stock
Price:
$59.61

Hub nut (hub nut for top-load washer. If this nut is stripped or damaged, the washer may be noisy.)

This part is the hub nut, or lock down nut for your washing machine. It is designed to hold the inner tub on to the transmission. If your hub nut is stripped or damaged, it may need to be replaced. This hub nut is approximately 1.5 inches in diameter. This is an OEM part sourced directly from the manufacturer. You will need a hub nut wrench and some WD40 to loosen the nut and remove it from the agitator shaft.

Easy Part #:
EAP271505
Availability:
In Stock
Price:
$11.23

Split ring (split ring bushing at outer tub)

This split ring is two inches in diameter.

Easy Part #:
EAP1766022
Availability:
In Stock
Price:
$7.26

V-style drive belt (washing machine drive belt - lengh is 29 1/2 inches.)

The V-style drive belt works in conjunction with your washing machine by connecting the drive motor to the drive system in your washer to spin the tub. If the tub is no longer moving the belt may be bad and will need to be replaced. The drive belt measures 29 1/2” L x 1/2” W. Please remember to disconnect the water supply and power to the washer before starting your repair. This is a genuine OEM V-style drive belt.

Easy Part #:
EAP270803
Availability:
In Stock
Price:
$13.73

Tub bearing washer (washer tub bearing. This tub bearing helps to keep the inner tub spinning smoothly.)

The tub bearing washer goes between the transmission and the tub bearing in your washer. This part helps to keep the inner tub spinning smoothly during operation. If your washer is noisy you may hear the bearing wearing on the transmission and the tub bearing washer will need to be replaced. This part is gray in color and measures approximately 2” in diameter. This is a genuine OEM part. Please disconnect the power and water supply to the washer before starting this repair.

Easy Part #:
EAP271509
Availability:
In Stock
Price:
$9.28

Drain hose clip (mounting clip for washing machine drain hose.)

This clip holds the drain hose to the back of the washer.

Easy Part #:
EAP270508
Availability:
In Stock
Price:
$8.39

Hub washer

This is a replacement hub washer for your washing machine. If your washer is noisy, leaking, shaking, or pumping without spinning, you may need to replace the hub washer. The hub washer is found under the washer tub, beneath the split ring. You will need to remove the tub to access it. Before doing so you should disconnect the power and water sources from washer. The washer is made of metal and is a little more than an inch in diameter. It is sold individually, and is an OEM part.

Easy Part #:
EAP271511
Availability:
In Stock
Price:
$8.57

Pump to tub inlet drain hose (hose from outer tub to the drain pump)

This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.

Easy Part #:
EAP11721808
Availability:
In Stock
Price:
$15.77

Water pressure switch hose (pressure switch hose)

This is a water pressure switch hose, also known as the air dome tube, for your washer. It is made of clear plastic and is sold individually. The hose transports water to your water pressure switch, so the switch can control how much water enters the washer during a cycle. If your washer will not fill up with water, or if water continues to fill the tub even after it is full, you may have a damaged water pressure switch hose. Inspect the hose for cracks and leaks, and if the hose is damaged you will need to replace it.

Easy Part #:
EAP272183
Availability:
In Stock
Price:
$10.15

Inner tub base hub (hub, inner tub base)

This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, and it holds the spin basket on the gear case shaft. The main reason you would want to replace the hub, is if the washer will not agitate, or if you notice excessive noise or shaking when the washer is in use. Be sure to disconnect the washer from the water and power sources before you begin this repair. This part is sold individually and is and OEM part from the manufacturer.

Easy Part #:
EAP273296
Availability:
In Stock
Price:
$80.33
< PREV 1 2 3 4 5 6 7 8
1-15 of 116